Can someone just check to see if I have a problem with my RAM. Thanks

thomas_4th

Distinguished
Nov 2, 2009
4
0
18,510
I'm not sure if I have a problem with my RAM compatability. I started with 2Gig, 2 x Corsair CM2X1024-6400C4DHX . I later wanted to add 2 more gig and as the RAM I already had was out of strock at the time i picked up some Corsair CM2X1024-6400C4. All the same number appart from the DHX which I thought only refered to the heat sinks that come on the chips.

Problem is there seem to be some differences looking at all 4 slots with CPU-Z. Now i'm not sure if this is a problem.

Motherboard is a ASUS P5E - x38 chipset. CPU - Q6600 not overclocked.

ram-info.jpg



If anyone can quickly scan over the info and tell me if I have a problem will be great.
Thanks.
 

roonj

Distinguished
Sep 24, 2009
736
0
19,060
Ghislain is correct that will work, good news is corsair rated those dhx at 4-4-4-12 and 2.1v which is the same as the C4 set you have. Voltage is a match as well so you can use the faster timings but since the dhx doesn't have the profile stored you will have to type it in.
 

thomas_4th

Distinguished
Nov 2, 2009
4
0
18,510
Thanks for the replys.
When i was running just the DHXs I had them a 4-4-4-12 and 1.8v but when I added the two extra chips I just set things back to normal and thought nothing of it.
I've now got them set to 4-4-4-12 and 1.9v and everything seems to be running ok. Will run memtest86+ just to be sure.
Thanks