Hi, I have spent approximately two days trying to fix an issue I have been having with a desktop that I have been trying to build for my father and am stuck at the same exact problem. The build I am currently using for this computer consists of the following parts (all of which are brand new):
Case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811129021
Motherboard: http://www.newegg.com/Product/Product.aspx?Item=N82E16813131730
PSU: http://www.newegg.com/Product/Product.aspx?Item=N82E16817371049
RAM: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231421 (two of these)
Hard Drives: http://www.newegg.com/Product/Product.aspx?Item=N82E16822136769 (being used for storage and I also have a 320gb 7200 RPM drive that I planned on using for the OS installation and I can't find the URL for it.)
CPU: http://www.newegg.com/Product/Product.aspx?Item=N82E16819115074
CD/DVD Drive: http://www.newegg.com/Product/Product.aspx?Item=N82E16827151235
Monitors: http://www.newegg.com/Product/Product.aspx?Item=N82E16824009241
Video Card: The video card I'm using is an old nVidea GeForce 9400GT and I can't seem to find a URL for it.
When I initially assembled the components together, I was able to successfully boot the system long enough to install Windows 7 Professional edition on the 320gb hard drive. After the installation completed, I used the My Computer function to ensure both hard drives were being detected and found that the 500gb hard drive was not being detected. I decided to reboot the system to open the bios and see if the hard drive was being detected by the bios. However, this lead to me discovering that the bios had detected an overheating issue with the CPU (it was running at temperatures of 98C). I then disassembled the computer to examine the thermal paste on the CPU to see if it was making good contact, and everything looked evenly spread and ordinary. When I tried to reassemble the computer, however, I was no longer able to get a display to show up on the monitor and the boot sequence had changed.
Everytime I attempt to boot the system, the computer will turn itself on for about 15-20 seconds (all the lights on the motherboard flash, the hard drives start spinning and all the fans spin as well) and then turn itself off again, but then it will turn back on and stay turned on. During this entire time, however, I will not get any visual display to show on the monitor. The only thing the monitor does is show a message saying it has no signal, and then it enters the sleep mode. I have tried using replacement parts for both the CPU and the motherboard (same exact models) and I even tried using another brand new power supply (800W Cooler Master Gold edition) and I still get the same error, no visual display on the monitor. I have also tested to ensure the monitor isn't failing, and am all out of ideas as to why all my brand new parts (for some two new parts) fail to work. Any assistance will be greatly appreciated, as I would love to assemble my father's computer as soon as possible.
Case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811129021
Motherboard: http://www.newegg.com/Product/Product.aspx?Item=N82E16813131730
PSU: http://www.newegg.com/Product/Product.aspx?Item=N82E16817371049
RAM: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231421 (two of these)
Hard Drives: http://www.newegg.com/Product/Product.aspx?Item=N82E16822136769 (being used for storage and I also have a 320gb 7200 RPM drive that I planned on using for the OS installation and I can't find the URL for it.)
CPU: http://www.newegg.com/Product/Product.aspx?Item=N82E16819115074
CD/DVD Drive: http://www.newegg.com/Product/Product.aspx?Item=N82E16827151235
Monitors: http://www.newegg.com/Product/Product.aspx?Item=N82E16824009241
Video Card: The video card I'm using is an old nVidea GeForce 9400GT and I can't seem to find a URL for it.
When I initially assembled the components together, I was able to successfully boot the system long enough to install Windows 7 Professional edition on the 320gb hard drive. After the installation completed, I used the My Computer function to ensure both hard drives were being detected and found that the 500gb hard drive was not being detected. I decided to reboot the system to open the bios and see if the hard drive was being detected by the bios. However, this lead to me discovering that the bios had detected an overheating issue with the CPU (it was running at temperatures of 98C). I then disassembled the computer to examine the thermal paste on the CPU to see if it was making good contact, and everything looked evenly spread and ordinary. When I tried to reassemble the computer, however, I was no longer able to get a display to show up on the monitor and the boot sequence had changed.
Everytime I attempt to boot the system, the computer will turn itself on for about 15-20 seconds (all the lights on the motherboard flash, the hard drives start spinning and all the fans spin as well) and then turn itself off again, but then it will turn back on and stay turned on. During this entire time, however, I will not get any visual display to show on the monitor. The only thing the monitor does is show a message saying it has no signal, and then it enters the sleep mode. I have tried using replacement parts for both the CPU and the motherboard (same exact models) and I even tried using another brand new power supply (800W Cooler Master Gold edition) and I still get the same error, no visual display on the monitor. I have also tested to ensure the monitor isn't failing, and am all out of ideas as to why all my brand new parts (for some two new parts) fail to work. Any assistance will be greatly appreciated, as I would love to assemble my father's computer as soon as possible.