Hey
Just built a new pc over the holidays, System setup is as follows
Amd Phenom II 955 BE Deneb 3.2Ghz
Msi 790FX GD70 Motherboard
Ati Sapphire 5870
Corsair DOminator DDR 3 1600 Ram
650 Watt power supply
My question is, why cannot i not reach 1600 ram speeds, Everything is the bios seeems to be running at the slowest possible speeds for my hardware
The Fbs is at 200 And the HT is at 2000, should this not bee at 400 and 4000. i Want to run my comp at the best setting but i refuse to touch voltages without somone who knows about this stuff giving me some tips
My Cell Menu in the bios is setup to defaults and looks like this
Here are the settings
Cell Menu
Current CPU Frequency 3.20 Ghz (200X16)
Cpu Specification
AMD Cool N Quite Control (Auto)
Adjust Cpu FBS Frequency (200)
Adjust Cpu Ratio (auto)
Adjust Cpu Frequency (3200)
Adjust Cpu NB Ration (Auto)
Adjust Cpu NB Frequency (2000)
EC FirmWare (Normal)
Advanced Clock Caliberation (Disabled)
Cpu Core Control (Auto)
Auto Overclock Technology (Disabled)
Multistep Oc Booster (Disabled)
Oc Dial Function (Disabled)
Fbs/Dram Ration (Auto)
Adjust Dram Frequency (1066) Auto
Ht link control (Press Enter)
Adjust HT Frequency (2000)
Cpu VDD Voltage (Auto) = 1.0
Cpu NB VDD Voltage (auto) = 1.0
Cpu Voltage (auto) = 1.35
Cpu NB Voltage (auto) = 1.0
Cpu Pll Voltage (auto) = 2.5
Cpu DDR PHY Voltage (auto) = 1.2
Dram Voltage (auto) = 1.6
DDR VRef Voltage (auto) =1.6
NB Voltage (auto) = 1.0
Ht Link VOltage (auto) = 1.2
SB Voltage (auto) 1.2
Can someone please help me with changing some of these voltages to achieve ddr 3 1600 and a HT of 4000
Just built a new pc over the holidays, System setup is as follows
Amd Phenom II 955 BE Deneb 3.2Ghz
Msi 790FX GD70 Motherboard
Ati Sapphire 5870
Corsair DOminator DDR 3 1600 Ram
650 Watt power supply
My question is, why cannot i not reach 1600 ram speeds, Everything is the bios seeems to be running at the slowest possible speeds for my hardware
The Fbs is at 200 And the HT is at 2000, should this not bee at 400 and 4000. i Want to run my comp at the best setting but i refuse to touch voltages without somone who knows about this stuff giving me some tips
My Cell Menu in the bios is setup to defaults and looks like this
Here are the settings
Cell Menu
Current CPU Frequency 3.20 Ghz (200X16)
Cpu Specification
AMD Cool N Quite Control (Auto)
Adjust Cpu FBS Frequency (200)
Adjust Cpu Ratio (auto)
Adjust Cpu Frequency (3200)
Adjust Cpu NB Ration (Auto)
Adjust Cpu NB Frequency (2000)
EC FirmWare (Normal)
Advanced Clock Caliberation (Disabled)
Cpu Core Control (Auto)
Auto Overclock Technology (Disabled)
Multistep Oc Booster (Disabled)
Oc Dial Function (Disabled)
Fbs/Dram Ration (Auto)
Adjust Dram Frequency (1066) Auto
Ht link control (Press Enter)
Adjust HT Frequency (2000)
Cpu VDD Voltage (Auto) = 1.0
Cpu NB VDD Voltage (auto) = 1.0
Cpu Voltage (auto) = 1.35
Cpu NB Voltage (auto) = 1.0
Cpu Pll Voltage (auto) = 2.5
Cpu DDR PHY Voltage (auto) = 1.2
Dram Voltage (auto) = 1.6
DDR VRef Voltage (auto) =1.6
NB Voltage (auto) = 1.0
Ht Link VOltage (auto) = 1.2
SB Voltage (auto) 1.2
Can someone please help me with changing some of these voltages to achieve ddr 3 1600 and a HT of 4000