Question Cannot see BIOS in both dedicated and integrated graphics card

[Ajunta Pal]

There is no way for me to see my bios.
My dedicated GPU does not activate until after the BIOS setting screen thus preventing me from seeing the BIOS interface.
So I figured I should force the motherboard to use the on board GPU instead by removing the dedicated GPU and connecting the display adapter of motherboard to my monitor. In the end it only shows "no signal".
I have already tried resetting the CMOS in case the dedicated GPU is set as the display first priority but the same thing happens where the monitor shows "no signal".
The problem is not the monitor since I have already tried this with a spare monitor and the results are the same.
The only remaining option is to switch from legacy BIOS to UEFI but even that would require accessing the BIOS.

Are there still any workaround I haven't tried that you might be able to suggest?
Any suggestion will be much appreciated. Thank you in advance!

Processor: Intel(R) Core(TM) i5-3470 @3.20GHz
System Type: 64-bit
RAM: 8GB
OS: Windows 10.0.18362 Build 18362
Motherboard: Biostar M61MGV3
GPU: GTX 1050 Ti
BIOS Mode: Legacy
SMBIOS Version: 2.7

 

[rgd1101]

full system spec?

 

[Ajunta Pal]

full system spec?

Hi,
here is my PC spec:

Processor: Intel(R) Core(TM) i5-3470 @3.20GHz
System Type: 64-bit
RAM: 8GB
OS: Windows 10.0.18362 Build 18362
Motherboard: Biostar M61MGV3
GPU: GTX 1050 Ti
BIOS Mode: Legacy
SMBIOS Version: 2.7

Thank you,