[SOLVED] cannot use my all 6 cores.

Aug 11, 2020
2
0
10
i have AMD FX-6300 6 cores processor .In my device manager it shows all the cores but when i opened my task manager it shows only 2 cores . In addition i have tried BIOS setting but it shows only 2 cores. I have done all the previous suggestions but it did not work plz help me
 
Solution
Go to BIOS and set to defaults or optimized defaults then shut down computer. Now take out CMOS battery for 5 minutes put it back in and now boot up and check your taskmanager and see if you see all the cores. Good Luck ;)
Aug 11, 2020
2
0
10
have you looked in CPUZ to see what it shows?- https://www.cpuid.com/

Screenshots might help
Was Windows installed when you had the FX6300 or have you changed the cpu and/or motherboard since originally installing Windows?
Was Windows installed when you had the FX6300 or have you changed the cpu and/or motherboard since originally installing Windows?
i just changed my OS .A week ago i installed windows 10
 

Turtle Rig

Prominent
BANNED
Jun 23, 2020
772
104
590
Go to BIOS and set to defaults or optimized defaults then shut down computer. Now take out CMOS battery for 5 minutes put it back in and now boot up and check your taskmanager and see if you see all the cores. Good Luck ;)
 
Solution

Latest posts