Canon I950

[Don]

Archived from groups: comp.periphs.printers (More info?)

Folks

I have been experiencing great quality prints using the I950, canon inks and
canon papers. I have made no changes I can recall but all of a sudden I
have the printer spitting out perfect prints except for the colour range.
It seems to have taken on a purple pinkish tinge. Very slight but enough to
throw things. I have tried a reinstall of the drivers and the like but to
no avail. I am using Canon Easy Photoprint but have tried through other
printing programs. Still the same problem. I have deep cleaned etc but to
no avail. When I use the default settings as I used to, in the printer
settings ICM was turned off. Should I turn this on and would it make any
difference.

regards


--
Don From Down Under

 

[Guest]

Archived from groups: comp.periphs.printers (More info?)

On Tue, 08 Jun 2004 10:08:29 GMT, "Don" <mackie.don@bigpond.com>
wrote:

>Folks
>
>I have been experiencing great quality prints using the I950, canon inks and
>canon papers. I have made no changes I can recall but all of a sudden I
>have the printer spitting out perfect prints except for the colour range.
>It seems to have taken on a purple pinkish tinge. Very slight but enough to
>throw things. I have tried a reinstall of the drivers and the like but to
>no avail. I am using Canon Easy Photoprint but have tried through other
>printing programs. Still the same problem. I have deep cleaned etc but to
>no avail. When I use the default settings as I used to, in the printer
>settings ICM was turned off. Should I turn this on and would it make any
>difference.
>
>regards


I would leave ICM turned off Have you used programs such as photoshop
or other printing software that is changing the print profile? Have
you changed the print profile in anything else? That may be your
trouble.

Install a basic srgb profile to the print drivers itsself and see if
that clears up.

I know if I use the profile that Redriverpapers.com recommends for
their papers, I get a magenta overcast. So I stick with the basic srgb
profile for all my printing.

 

[Don]

Archived from groups: comp.periphs.printers (More info?)

Beezer how?

Install a basic srgb profile to the print drivers itsself and see if
that clears up.

Regards

Don


"beezer" <beezer@rezeeb.moc> wrote in message
news:r0rbc0hm2v472jjfqmjfgrt13b23oauvj3@4ax.com...
> On Tue, 08 Jun 2004 10:08:29 GMT, "Don" <mackie.don@bigpond.com>
> wrote:
>
> >Folks
> >
> >I have been experiencing great quality prints using the I950, canon inks
and
> >canon papers. I have made no changes I can recall but all of a sudden I
> >have the printer spitting out perfect prints except for the colour range.
> >It seems to have taken on a purple pinkish tinge. Very slight but enough
to
> >throw things. I have tried a reinstall of the drivers and the like but
to
> >no avail. I am using Canon Easy Photoprint but have tried through other
> >printing programs. Still the same problem. I have deep cleaned etc but
to
> >no avail. When I use the default settings as I used to, in the printer
> >settings ICM was turned off. Should I turn this on and would it make any
> >difference.
> >
> >regards
>
>
> I would leave ICM turned off Have you used programs such as photoshop
> or other printing software that is changing the print profile? Have
> you changed the print profile in anything else? That may be your
> trouble.
>
> Install a basic srgb profile to the print drivers itsself and see if
> that clears up.
>
> I know if I use the profile that Redriverpapers.com recommends for
> their papers, I get a magenta overcast. So I stick with the basic srgb
> profile for all my printing.
>

 

[Guest]

Archived from groups: comp.periphs.printers (More info?)

On Wed, 09 Jun 2004 10:30:42 GMT, "Don" <mackie.don@bigpond.com>
wrote:

>Beezer how?
>
>Install a basic srgb profile to the print drivers itsself and see if
>that clears up.
>
>Regards
>
>Don


in your printer properties, go to the color management tab, then add

you should see your installed profiles. add a basic srgb profile
thats already on your computer and see that it selects it as default

then print something small that you know gave you trouble before and
see what happens.

 

[Don]

Archived from groups: comp.periphs.printers (More info?)

Beezer

will try this out. Thanks

Don
"beezer" <beezer@rezeeb.moc> wrote in message
news:0viec0p7ci83l783766jp3ua92kc8auguo@4ax.com...
> On Wed, 09 Jun 2004 10:30:42 GMT, "Don" <mackie.don@bigpond.com>
> wrote:
>
> >Beezer how?
> >
> >Install a basic srgb profile to the print drivers itsself and see if
> >that clears up.
> >
> >Regards
> >
> >Don
>
>
> in your printer properties, go to the color management tab, then add
>
> you should see your installed profiles. add a basic srgb profile
> thats already on your computer and see that it selects it as default
>
> then print something small that you know gave you trouble before and
> see what happens.
>
>