Canon S330 Photo prints black and magenta only.

[Stryker]

Archived from groups: comp.periphs.printers (More info?)

I've had it for 2 years and brilliant performance.

Yesterday started printing black and magenta only.

Done all the diagnostics. Re-installed latest driver, changed cartridges
(Canon originals) repeatedly, cleaned print-head several times and it's just
the same. Nozzle test prints black and magenta only.

It is probably a failed print-head but why did it fail? Canon don't even
mention print-head failure in their handbook or on their site.

Canon Technical Support do not respond to e-mail questions and I need my
printer fixed.

Quite happy to buy new one if print-head is the problem because replacements
are ridiculously expensive.

Can anybody in this NG tell me for sure if it can only be a failed
print-head and put me out of my misery?

TIA

Stryker

--
Scanned by AVG AV Professional Version 7.0
www.grisoft.com

 

[Tony]

Archived from groups: comp.periphs.printers (More info?)

"Stryker" <stryker@iwojima.com> wrote in message
news:416d09ee$0$22872$cc9e4d1f@news-text.dial.pipex.com...
> I've had it for 2 years and brilliant performance.
>
> Yesterday started printing black and magenta only.
>
> Can anybody in this NG tell me for sure if it can only be a failed
> print-head and put me out of my misery?
>
> TIA
>
> Stryker

You may well have noticed that this newsgroup is often speckled with Canon
apparent print head failures. I have an S-820 used with invoices only and it
fails twice a week on average.
The possible way is to remove the head and soak it a while in a solution of
household ammonia , just the first 10th of an inch or so. This should ensure
that any encrusted crud is dispersed. Filling an old cartridge with such a
mix forces the solvent from within as well.
But, the sad news is that the heat elements do fail - and worse still I
suppose that Canon don't react. Unlike the cold Piezo Epson print technology
the Canon goes out with a bang.
Good luck.
Tony

--
Inkylink JetTec UK/USA Quality - Wot others wanna-be
http://www.inkylinkusa.com/inkylinkusa.shtml UPS from Las Vegas
http://www.inkylink.co.uk UK recorded post next day
The home of the 30% more JetTec ink reset chip

 

[Stryker]

Archived from groups: comp.periphs.printers (More info?)

Thanks Tony

"Tony" <webfive@pantsaah-haa.com> wrote in message
news:xLGdnXAeWb86s_DcRVn-sw@nildram.net...
>
>
> "Stryker" <stryker@iwojima.com> wrote in message
> news:416d09ee$0$22872$cc9e4d1f@news-text.dial.pipex.com...
>> I've had it for 2 years and brilliant performance.
>>
>> Yesterday started printing black and magenta only.
>>
>> Can anybody in this NG tell me for sure if it can only be a failed
>> print-head and put me out of my misery?
>>
>> TIA
>>
>> Stryker
>
> You may well have noticed that this newsgroup is often speckled with Canon
> apparent print head failures. I have an S-820 used with invoices only and
> it
> fails twice a week on average.
> The possible way is to remove the head and soak it a while in a solution
> of
> household ammonia , just the first 10th of an inch or so. This should
> ensure
> that any encrusted crud is dispersed. Filling an old cartridge with such a
> mix forces the solvent from within as well.
> But, the sad news is that the heat elements do fail - and worse still I
> suppose that Canon don't react. Unlike the cold Piezo Epson print
> technology
> the Canon goes out with a bang.
> Good luck.
> Tony
>
> --
> Inkylink JetTec UK/USA Quality - Wot others wanna-be
> http://www.inkylinkusa.com/inkylinkusa.shtml UPS from Las Vegas
> http://www.inkylink.co.uk UK recorded post next day
> The home of the 30% more JetTec ink reset chip
>
>
>