[SOLVED] Can't access the 4 pin header

[xblade002003]

I'm trying to plug the case fan and i only have 2 4 pin header, one is for the cpu fan but the other one is hidden under the gpu

 

[rgd1101]

what the motherboard model?

 

[Schlachtwolf]

What motherboard do you have ? You could always use one of these ....

The cost very little and do the job fine and then depending on the voltage requiered you can run normally 3-5 fans from 1 header on the motherboard.

Cheers

 

[xblade002003]

What motherboard do you have ? You could always use one of these ....

The cost very little and do the job fine and then depending on the voltage requiered you can run normally 3-5 fans from 1 header on the motherboard.

Cheers

Asrock h61m-dgs rs 2.0

 

[xblade002003]

Asrock h61m-dgs rs 2.0

Is that a splitter and where can i plug it,

 

[xblade002003]

Asrock h61m-dgs

 

[Schlachtwolf]

EASY, just plug the splitter into the 4 pin fan header on your motherboard and the fans into the splitter, speed is controlled by the bios as normal with 4 pin fans!!! Job done.