Can't access WIFI bridge connection from Laptop to Desktop

[brandrixco]

Hey guys,

I can't seem to be able to connect my bridged connection from my lap top to my pc.

My Laptop is connect to a wireless router and I'm trying to use that connection to then bridge it on my desktop using ethernet (So basically a laptop hub).

And my network stuff
C:\Users\brandon>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : BrandonPC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Local Area Connection* 3:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 1E-81-58-FF-90-3D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : F0-7B-CB-CA-70-09
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wi-Fi:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Qualcomm Atheros AR9287 Wireless Network
Adapter
Physical Address. . . . . . . . . : 2C-81-58-FF-90-3D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::a0f0:5d20:33b2:53aa%4(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.102(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : December 18, 2013 9:37:24 PM
Lease Expires . . . . . . . . . . : December 25, 2013 9:37:24 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 70025560
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-DE-A2-75-54-42-49-15-53-8C

DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Ethernet:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8057 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 54-42-49-15-53-8C
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::c975:73a2:8237:2011%3(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.32.17(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 55853641
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-DE-A2-75-54-42-49-15-53-8C

DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{57B13A17-EF94-41D4-85B5-7CE591B3EA47}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{4E7BB2CD-AA9A-430C-B8E5-6CA75786CFBE}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

 

[RealBeast]

Your wireless looks fine. The Ethernet adapter has the settings that Windows uses for an unidentified network. I assume that you are just using a cable between the two machines?

Are you trying to just use ICS or are you bridging the adapters in the network control panel, change adapter settings?

 

[brandrixco]

Yes I'm using a cable (cross over) two connect the two machines.

I'm Bridging the adaptors in the network contol panel.

 

[RealBeast]

I would try removing the connection bridge and turn on ICS in the adapter that has the Internet connection instead.