So I just bought a new mobo, case, cpu cooler and an additional stick of ram and transplanted the rest into the new case
My final specs are as follows:
Corsair 780T
AMD FX8350 Black
Asus Sabertooth 990FX R2.0
Corsair Vengeance DDR3-1600 8GB x2 = 16GB total
Corsair H110 Cooler
Samsung 840EVO 250GB SSD
WD Caviar Blue 1 TB HDD
EVGA GeForce GTX 760 2GB
Corsair CX600W PSU
From my old system, I brought over the CPU, 1 stick of ram, my GPU and both hard drives (SSD has windows 8.1, HDD for extra storage)
Build went pretty smoothly as far as I could tell. I'm able to access the BIOS without a problem by pressing delete during boot, but nothing else seems to work.
If I boot to the SSD with windows on it, it gets stuck on "Preparing Automatic Repair" - the logo spins for a few seconds and then freezes
If I boot to the DVD drive with the Windows 8.1 install disk, the logo spins for a few seconds and then freezes
If I boot to a USB drive with the Windows install files, the logo spins and freezes
I'm sure that there is some issue with the change of mobo, and the windows installation on my existing SSD - I'd have no issues reformatting if necessary, but I can't even get into the Windows install menu to accomplish that. The only thing I can think of is to connect both drives to another system and try to reformat them that way, but I'm not sure. Any help would be greatly appreciated.
My final specs are as follows:
Corsair 780T
AMD FX8350 Black
Asus Sabertooth 990FX R2.0
Corsair Vengeance DDR3-1600 8GB x2 = 16GB total
Corsair H110 Cooler
Samsung 840EVO 250GB SSD
WD Caviar Blue 1 TB HDD
EVGA GeForce GTX 760 2GB
Corsair CX600W PSU
From my old system, I brought over the CPU, 1 stick of ram, my GPU and both hard drives (SSD has windows 8.1, HDD for extra storage)
Build went pretty smoothly as far as I could tell. I'm able to access the BIOS without a problem by pressing delete during boot, but nothing else seems to work.
If I boot to the SSD with windows on it, it gets stuck on "Preparing Automatic Repair" - the logo spins for a few seconds and then freezes
If I boot to the DVD drive with the Windows 8.1 install disk, the logo spins for a few seconds and then freezes
If I boot to a USB drive with the Windows install files, the logo spins and freezes
I'm sure that there is some issue with the change of mobo, and the windows installation on my existing SSD - I'd have no issues reformatting if necessary, but I can't even get into the Windows install menu to accomplish that. The only thing I can think of is to connect both drives to another system and try to reformat them that way, but I'm not sure. Any help would be greatly appreciated.