Question Cant connect molex fan to PSU

Apr 8, 2019
44
4
45
1
Noob is online again LOL.

OK, i have a Zalman z3 Plus case which came with 4 included fans. Two of this fans (the upper2) have a molex conection and one more conection that i dont know what is.
My problem is that this male molex i cant conect to the Seasonic PSU because i have only male molex cable also.How can i connect them to PSU?
This is my PSU:
https://www.amazon.co.uk/Seasonic-S12II-Bronze-Power-Supply-Total-620-W/dp/B003BIEOCI

This is how the molex and other conection looks on my case fans:




I also ordered a Fan controller Deepcool FH-10 Fan Hub which was near me and available in my country that will arrive in 24-48 hours but i dont thik that will help me to power up the coolers with molex conection.
http://www.deepcool.com/product/dcoolingaccessory/2017-11/12_7223.shtml
Kind a noob in conecting fans and stuff like this. I mean i know to change CPU's GPU, and other components but shit is over my experience. LOL. HELP A NOOB.
 
Apr 8, 2019
44
4
45
1
if the connectors come from fans , with a molex connector you gotta draw one molex from your psu and connect the two molex , like that .
Now i strip out the bottom of case and i see that the molex cable and other 2 conectors with 2 pins come from the fan controller button. So now? How do I conect the remainng 2 conectors with 2 pins on the PSU?
 

bniknafs9

Upstanding
Jan 21, 2019
271
8
295
4
Now i strip out the bottom of case and i see that the molex cable and other 2 conectors with 2 pins come from the fan controller button. So now? How do I conect the remainng 2 conectors with 2 pins on the PSU?
no you gotta connect the molex that is with your fan headers to a molex cable that Comes from your psu , the other end that connects to the psu is usually not molex like if it's modular
 
Apr 8, 2019
44
4
45
1

bniknafs9

Upstanding
Jan 21, 2019
271
8
295
4
Well this is my PSU:

https://www.amazon.co.uk/Seasonic-S12II-Bronze-Power-Supply-Total-620-W/dp/B003BIEOCI

I find where to plug in the molex with 4 pins but the little 2 connectors with two pins o dont see any where i could plug them on PSU.
i seriously doubt if the 2 small connectors are to be connected anywhere to the psu , if you got all your fans running then leave them as they are . if not you can connect your extra fans to your power supply , instead of your mother board .
 
Reactions: adicretzu
Apr 8, 2019
44
4
45
1
from page 7 of case manual those 2 fans connector goes to front panel fans controller in the case .
LOL Thanks alot man. I feel so stupid. But on my manual from the box doesnt refer to so much details. I will search on the producer site for manual.
 
Last edited:
Apr 8, 2019
44
4
45
1
Sorry this is the inside photo to see what am i talking about. Also if i had a straight SATA for SSD then i could mount the SSD with the Samsung brand up.
 

ASK THE COMMUNITY

TRENDING THREADS