Question Cant connect molex fan to PSU

[adicretzu]

Noob is online again LOL.

OK, i have a Zalman z3 Plus case which came with 4 included fans. Two of this fans (the upper2) have a molex conection and one more conection that i dont know what is.
My problem is that this male molex i cant conect to the Seasonic PSU because i have only male molex cable also.How can i connect them to PSU?
This is my PSU:
https://www.amazon.co.uk/Seasonic-S12II-Bronze-Power-Supply-Total-620-W/dp/B003BIEOCI

This is how the molex and other conection looks on my case fans:

I also ordered a Fan controller Deepcool FH-10 Fan Hub which was near me and available in my country that will arrive in 24-48 hours but i dont thik that will help me to power up the coolers with molex conection.
http://www.deepcool.com/product/dcoolingaccessory/2017-11/12_7223.shtml
Kind a noob in conecting fans and stuff like this. I mean i know to change CPU's GPU, and other components but shit is over my experience. LOL. HELP A NOOB.

 

[adicretzu]

LOL i think i found the ''PERFECT MATCH'' but still the other 2 conectors remaining what are for and what is their name?

 

[bniknafs9]

your connector seems to have both male and female back to back , what is your issue again ?

 

[adicretzu]

your connector seems to have both male and female back to back , what is your issue again ?

Near the molex in picture i have two more conectors each with 2 small pins. What are that conectors for?

 

[bniknafs9]

Near the molex in picture i have two more conectors each with 2 small pins. What are that conectors for?

from what it looks like they are 120 mm fan headers connectors ?

they will connect to the fans on your eithger case , or your radiator

 

[adicretzu]

from what it looks like they are 120 mm fan headers connectors ?

they will connect to the fans on your eithger case , or your radiator

I will search on my case but i cant see where to plug that conectors

 

[adicretzu]

The conectors come from fans how could they be conected again in fans?

 

[bniknafs9]

The conectors come from fans how could they be conected again in fans?

if the connectors come from fans , with a molex connector you gotta draw one molex from your psu and connect the two molex , like that .

 

[bniknafs9]

that will make your fans spin .

 

[adicretzu]

if the connectors come from fans , with a molex connector you gotta draw one molex from your psu and connect the two molex , like that .

Now i strip out the bottom of case and i see that the molex cable and other 2 conectors with 2 pins come from the fan controller button. So now? How do I conect the remainng 2 conectors with 2 pins on the PSU?

 

[bniknafs9]

Now i strip out the bottom of case and i see that the molex cable and other 2 conectors with 2 pins come from the fan controller button. So now? How do I conect the remainng 2 conectors with 2 pins on the PSU?

no you gotta connect the molex that is with your fan headers to a molex cable that Comes from your psu , the other end that connects to the psu is usually not molex like if it's modular

 

[adicretzu]

no you gotta connect the molex that is with your fan headers to a molex cable that Comes from your psu , the other end that connects to the psu is usually not molex like if it's modular

Well this is my PSU:

https://www.amazon.co.uk/Seasonic-S12II-Bronze-Power-Supply-Total-620-W/dp/B003BIEOCI

I find where to plug in the molex with 4 pins but the little 2 connectors with two pins o dont see any where i could plug them on PSU.

 

[bniknafs9]

Well this is my PSU:

https://www.amazon.co.uk/Seasonic-S12II-Bronze-Power-Supply-Total-620-W/dp/B003BIEOCI

I find where to plug in the molex with 4 pins but the little 2 connectors with two pins o dont see any where i could plug them on PSU.

i seriously doubt if the 2 small connectors are to be connected anywhere to the psu , if you got all your fans running then leave them as they are . if not you can connect your extra fans to your power supply , instead of your mother board .

 

[adicretzu]

Ok. Thanks. I will see if they run.

 

[scout_03]

from page 7 of case manual those 2 fans connector goes to front panel fans controller in the case .

 

[adicretzu]

from page 7 of case manual those 2 fans connector goes to front panel fans controller in the case .

LOL Thanks alot man. I feel so stupid. But on my manual from the box doesnt refer to so much details. I will search on the producer site for manual.

 

[adicretzu]

I manage to conect all wires properly and also the fan buton works ok. Thanks to all.

 

[bniknafs9]

that's a neat set up , do you happen to be from Korea ?

 

[adicretzu]

that's a neat set up , do you happen to be from Korea ?

No, Romania. 😊

 

[bniknafs9]

No, Romania. 😊

cool man

 

[adicretzu]

cool man

Still could be better but i wait for my fan hub Deepcool F10 to arrive so i dont work twice then i will do something with wires that are under SSD drive. That don't look to good.

 

[adicretzu]

Sorry this is the inside photo to see what am i talking about. Also if i had a straight SATA for SSD then i could mount the SSD with the Samsung brand up.

 

[bniknafs9]

that looks pretty need , although you don't really need a fan hub if it's only 2 headers , simple 1 to 2 would do since it's DC power .

 

[adicretzu]

that looks pretty need , although you don't really need a fan hub if it's only 2 headers , simple 1 to 2 would do since it's DC power .

yes i know but maybe a PWM fan hub is better to control them all by speedometer read by CPU. Because now i get low RPM on chassis fan.

 

[scout_03]

witch of the fan it is connect to board header it is a 3 pins or 4 pins pwm and if they are connect to controller try to use auto settings also check in bios if you could set them .