cant connect to router ! :( HELP :P

[peter234]

hi i tried to get into my router but i cant heres the problem http://i.imgur.com/cie1xcR.png
why does it say that ?
ps i use cable

 

[Dark Lord of Tech]

Reset the router.

 

[peter234]

have tried 😛

 

[BackwoodsTech]

Try to ping that address.

 

[peter234]

Try to ping that address.

4 sent 4 reseived* 0 lost

 

[BackwoodsTech]

Interesting, two questions then. Have you been able to get into it in the past and have you tried securely logging in using https:// ?

 

[peter234]

Interesting, two questions then. Have you been able to get into it in the past and have you tried securely logging in using https:// ?

since i got new router 2 month back or so i counldt connect to my router 🙁 and to the other question =no ;(

 

[BackwoodsTech]

Whats the model of the new router?

 

[Urumiko]

Hi.. i take it you intentionally blanked out the local ip and subnet etc? use subnetcalculator.com to check your gateway and host are in the same subnet.

You can also try telneting to port 80 on the router ip, if it cant connect the router isnt listening for http connections. If it connects then hangs all is ok.


when you say you reset the router... have you factory reset it?

 

[peter234]

my router is icotera
and the reason to they were blanked out is becouse i blanked them out 😛

 

[BackwoodsTech]

Alright, I assume if you just got a new one two months ago you probably have the IGW 3000. According to the documentation, depending on how it was set up, or if it functions as a DNS server you "should" be able to reach it at either http://igw3000 or http://igw3000 100.73.0.1

 

[peter234]

Alright, I assume if you just got a new one two months ago you probably have the IGW 3000. According to the documentation, depending on how it was set up, or if it functions as a DNS server you "should" be able to reach it at either http://igw3000 or http://igw3000 100.73.0.1

wont work it just sets igw3000.com and says the website dont exsist 😛
and resetting dosent work 🙁

 

[BackwoodsTech]

Hmmm.... running out of theories here lol.

 

[peter234]

Hmmm.... running out of theories here lol.

any idea why its trying to make the igw3000 to (.com)?

 

[BackwoodsTech]

I believe that means its not set up to handle your DNS. Did you try Urimiko's idea with the telnet to it on port 80?

 

[peter234]

I believe that means its not set up to handle your DNS. Did you try Urimiko's idea with the telnet to it on port 80?

tryed test port 80 on my ip it said it coulndt see it 🙁?+

 

[Urumiko]

Have you tried resetting the router to factory default? id try contacting the router manufacturer.