hello im Andrew and i need help with my bios.
when i tried to enter the bios with del (that's my corect key for the bios) it just beeps and black screens and when i open my computer i can't see any instructions or logo of asrock and this is my
information that i found in system information app
OS Name Microsoft Windows 10 Pro
Version 10.0.15063 Build 15063
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name ANDREI
System Manufacturer To Be Filled By O.E.M.
System Model To Be Filled By O.E.M.
System Type X86-based PC
System SKU To Be Filled By O.E.M.
Processor Intel(R) Celeron(R) CPU G550 @ 2.60GHz, 2600 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. P1.30, 10.05.2012
SMBIOS Version 2.7
Embedded Controller Version 255.255
BIOS Mode Legacy
BaseBoard Manufacturer ASRock
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Desktop
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale România
Hardware Abstraction Layer Version = "10.0.15063.502"
User Name andrei\Andrei
Time Zone GTB Standard Time
Installed Physical Memory (RAM) 4,00 GB
Total Physical Memory 2,97 GB
Available Physical Memory 706 MB
Total Virtual Memory 7,47 GB
Available Virtual Memory 4,30 GB
Page File Space 4,50 GB
Page File E:\pagefile.sys
Device Encryption Support Reasons for failed automatic device encryption: TPM is not usable, PCR7 binding is not supported, Hardware Security Test Interface failed and device is not InstantGo, Un-allowed DMA capable bus/device(s) detected, Disabled by policy, TPM is not usable
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware Yes
Hyper-V - Data Execution Protection Yes
i home to get a reply
Update: i found out a couple of minutes ago that not even the windows logo shows up or nothing.. and then it boots to windows 10
when i tried to enter the bios with del (that's my corect key for the bios) it just beeps and black screens and when i open my computer i can't see any instructions or logo of asrock and this is my
information that i found in system information app
OS Name Microsoft Windows 10 Pro
Version 10.0.15063 Build 15063
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name ANDREI
System Manufacturer To Be Filled By O.E.M.
System Model To Be Filled By O.E.M.
System Type X86-based PC
System SKU To Be Filled By O.E.M.
Processor Intel(R) Celeron(R) CPU G550 @ 2.60GHz, 2600 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. P1.30, 10.05.2012
SMBIOS Version 2.7
Embedded Controller Version 255.255
BIOS Mode Legacy
BaseBoard Manufacturer ASRock
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Desktop
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale România
Hardware Abstraction Layer Version = "10.0.15063.502"
User Name andrei\Andrei
Time Zone GTB Standard Time
Installed Physical Memory (RAM) 4,00 GB
Total Physical Memory 2,97 GB
Available Physical Memory 706 MB
Total Virtual Memory 7,47 GB
Available Virtual Memory 4,30 GB
Page File Space 4,50 GB
Page File E:\pagefile.sys
Device Encryption Support Reasons for failed automatic device encryption: TPM is not usable, PCR7 binding is not supported, Hardware Security Test Interface failed and device is not InstantGo, Un-allowed DMA capable bus/device(s) detected, Disabled by policy, TPM is not usable
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware Yes
Hyper-V - Data Execution Protection Yes
i home to get a reply
Update: i found out a couple of minutes ago that not even the windows logo shows up or nothing.. and then it boots to windows 10