I have two Kingston 4GB 2666MHz and two Adata 4GB 2666MHz, and am going for quad-channel.
My MOBO is an Asus B450M-A.
CPU is Ryzen 3 3200G with stock cooler.
Everything is brand-new.
I tried all sorts of combinations for the DIMM slots, always after a CMOS reset, but no matter how I did it, I never got the PC to boot when using all the 4 DIMM slots simultaneously. No POST beep sounds, no signal from monitor. However, as soon as I changed the memory speed (via BIOS Ai Tweak) from 2666MHz to 2400MHz, my PC was able to boot and get past POST normally. Bios is updated. Also, I don't have the option on enable D.O.C.P. on Asus EZ interface (Only Disable option is shown).Yeah, so I'm a little relieved no DIMM slot is damaged and all the memories work.
... But I'd LOVE to get my memories running at the speed they're supposed to run.
¿Any advice on how to accomplish this?
My MOBO is an Asus B450M-A.
CPU is Ryzen 3 3200G with stock cooler.
Everything is brand-new.
I tried all sorts of combinations for the DIMM slots, always after a CMOS reset, but no matter how I did it, I never got the PC to boot when using all the 4 DIMM slots simultaneously. No POST beep sounds, no signal from monitor. However, as soon as I changed the memory speed (via BIOS Ai Tweak) from 2666MHz to 2400MHz, my PC was able to boot and get past POST normally. Bios is updated. Also, I don't have the option on enable D.O.C.P. on Asus EZ interface (Only Disable option is shown).Yeah, so I'm a little relieved no DIMM slot is damaged and all the memories work.
... But I'd LOVE to get my memories running at the speed they're supposed to run.
¿Any advice on how to accomplish this?
Last edited: