I was getting these BSD prior to my attempt of reinstalling: Interrupt_Exception_Not_Handled, IRQL_Not_Less_or_Equal, WHEA_Uncorrectable_Error. This is when I attempted a clean install because I couldn't launch anything to get the mem dump or anything else to try to find out what the issue was. During the attempts at reinstall I am still getting IRQL_Not_Less_or_Equal, as well as getting new BSDs such as Kmode_Exception_Not_Handled, Machine_Check_Exception_Error, Driver_IRQL_Not_Less_or_Equal. I have tried multiple SSDs, a HDD, unplugged my GFX card, my peripherals etc I am not sure what I can do at this point, I have taken each stick of RAM out and tried one stick at a time, updated firmware, updated BIOS, continue to get BSD every time I get to the Windows 10 installation page via a USB that I tested on another computer to confirm it working.
Specs:
6700K (Never OC)
NZXT X41 Liquid Cooler
32Gb of Corsair Vengeance DDR4 RAM
MSI 1070 GTX
GA-Z170X-Gaming 7 (BIOS Updated)
480GB HyperX Savage SSD (Firmware Updated) Tested on different computer
240GB Neutron XT SSD (Firmware Updated) Tested on different computer
Corsair HXi Series, HX750i
Specs:
6700K (Never OC)
NZXT X41 Liquid Cooler
32Gb of Corsair Vengeance DDR4 RAM
MSI 1070 GTX
GA-Z170X-Gaming 7 (BIOS Updated)
480GB HyperX Savage SSD (Firmware Updated) Tested on different computer
240GB Neutron XT SSD (Firmware Updated) Tested on different computer
Corsair HXi Series, HX750i