Cant get Win10 PRo installed BSOD and more !

[budo2208]

I was running Windows 10 Pro for a week on my rig and suddently i got couple BSOD in roe, wasnt able boot into windows, trying reinstall windows with the original cd...

MemTest86 - no error detected....
Tryed one dimm of ram and switched for the other one, also on another slot...not working...
Unplugged all SSD and my 950 m2 ssd, tryed install on another HDD, not working.

I got all thoses Errors:

BSOD : -Pc ran into a problem....
Stop Code: PAGE FAULT IN NONPAGED AREA
What failed : Cl.dll

-PC ran into a problem...
StopCode: 0xc000021a

-PC ran into a problem...
Stop Code: SYSTEM THREAD EXCEPTION NOT HANDLED

-PC ran into a problem...
Stop Code: 0xc0000135

-PC ran into a problem...
Stop Code: CRITICAL PROCESS DIED


During Windows 10 Installation or at booting:
- Windows cannot install required files. Make sure all files required are avalaible, and restart. Error Code: 0x8007007B
- setup.exe - Application Error
The instruction at 0x00007FF877E7B5F0 referenced memory at 0x00007FF877E7B5F0. The required data was not placed into memory because of an I/O error status at 0x000001.
- System Restore
System restore did not complete successfully...
Details: The drive may be corrupt....
An unspecified error occured during System Restore: (0x81000206)
- Sign-in process initialization failure
Interactive sign-in process initialization has failed.
Please check event log for details.
- Windows Setup
Windows could not load device compatibility data. Error code: 0x1F


Once installed Windows 10 got this error:
- WerFault.exe - Application Error
The instruction at 0x000000007761 referenced memory at 0x0000000066482FAC. The memory could not be read


Asus Maximus VIII Hero Alpha
2x8 GB Corsair Vengeance Led 3200mhz
i7-6700k
Corsair H115i
EVGA Supernova P2 650W

 

[Colif]

PAGE FAULT IN NONPAGED AREA - this can be ram or a driver

Bug Check 0xC000021A: STATUS_SYSTEM_PROCESS_TERMINATED
Cause

This error occurs when a user-mode subsystem, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), has been fatally compromised and security can no longer be guaranteed. In response, the operating system switches to kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, this is one of the few cases where the failure of a user-mode service can shut down the system.
https://msdn.microsoft.com/en-us/library/windows/hardware/ff560177(v=vs.85).aspx

Critical Process Died - http://www.thewindowsclub.com/critical-process-died-error-windows

SYSTEM THREAD EXCEPTION NOT HANDLED

Stop Code: 0xc0000135 - Machine Check exception - https://www.xtremerain.com/fix-machine-check-exception/

Can you get into windows? It sounds like the installer is missing files. I would download the Windows 10 media creation tool and use it to make a win 10 installer on USB, and use it instead as its latest version of Windows.

 

[budo2208]

the weird thing is i installed it back with the same DVD-Rom and exact Same original CD. Yes i did get into windows once after couple trys but BSOD happened couple seconds after.... o and i did BIOS update 3-4 days ago. I build it bout 3weeks ago and all was running perfect.

I did install Utorrent, started a couple torrents, been eating and when i came back i had all those errors and BSOD.

 

[Colif]

two of those errors essentially lock you out of windows. System errors normally not associated with drivers
Cl.dll is to do with boot, so make that 3 system related errors.

what cd are you using? Install just needs 1 DVD, not two?

are yoiu overclocked? if so, remove it for installing windows. Is ram at right settings?

do you have latest BIOS? I assume board fairly new so might have improvements for memory configs

 

[budo2208]

Yes i have latest BIOS installed. Used EZ-Bios from Asus. I havent did any overclock im at 4.0 clock speed. My memory is using XMP Profile in BIOS. Im using Windows 10 Pro CD from microsoft that i bought on newegg... installed it bout 10-15days ago and was running perfectly.