Can't install SP1 and Event 19, WHEA-Logger in error logs

[dodgethat]

I've just built a new sandy bridge build with the following:

CPU: i5 2500K (no overclocking yet)
motherboard: Asus p8p67 pro
memory: Crucial 8GB 1333 mhz
GPU: Geforce 460 GTX SE
Power supply: Crucial 650TX
SSD: crucial 128 GB (primary w/ windows 7)
HDD: 500 GB Western Digital

I've just tried installing SP1 and it's not working with the automatic Windows Update utility. I've gone ahead and taken a look at the event logs and I see that there are at least 100 warning messages like as follows:

********************************
A corrected hardware error has occurred.

Reported by component: Processor Core
Error Source: Corrected Machine Check
Error Type: Internal parity error
Processor ID: 4

The details view of this entry contains further information.
********************************

I've updated the BIOS on my Motherboard, I've ran a memory check (memtest85+) that didn't result in any errors. However I haven't had any luck installing SP1 and after 3 failed attempts.

Only been using the computer for 2 days.

 

[dodoxxx]

problem same with ME,..
CPU: i5 2500K (no overclocking yet)
motherboard: Gigabyte H61M-D2-B3
memory: Visipro 4GB 1333 mhz
GPU: HIS ATI HD6850
Power supply: Corsair VX450
HDD: 500 GB + 1 TB Seagate
Win7 Ultimate SP 1 x86

I also update bios and replace with new MB but allways show WHEA logger on windows error logs,..
what's wrong,,,, the CPU or windows fault,..
I'm so confused,.....

 

[dodgethat2]

Mine ended up being the CPU's fault. I replaced the CPU and the WHEA logger stopped reporting errors. Although it still took some tweaks to get W7 SP1 installed.

 

[dodgethat]

Best answer selected by dodgethat.