Can't Install VisionTek Radeon HD 5450

[Ivan2836]

Hey so, I have been trying to install the VisionTek Radeon HD 5450 2GB, and my computer wont display anything on boot. From my experience, I can hear it going through BIOS, etc. but I cant see anything! I already went to safe mode and disabled the iGPU, but even if i plug in my VGA or HDMI cable into my iGPU, it wont work. Please give any help!
PS, and it is plugged in right!
--
Here are my specs

• 
  Computer/Motherboard: Acer TC 605-UR51
  CPU: Intel Core i5 4460
  Hard Drives: 1 7200rpm 2.5in HDD 500GB and 1 5400rpm 3.5in HDD 2TB
  RAM: 8GB DDR3 SDRAM
  Motherboard Model: MS-7869 Version 1.0

UPDATE: I was able to remove my GPU and get back my iGPU, but i still want to fix this problem!

 

[CountMike]

Aren't you plugging monitor into GPU ? IGPU probably turns IGPU off when dedicated GPU is inserted.

 

[Ivan2836]

Aren't you plugging monitor into GPU ? IGPU probably turns IGPU off when dedicated GPU is inserted.

Did you see the update?

 

[CountMike]

I see it now. Does that GPU need an extra power plug ?
You also said: "I already went to safe mode and disabled the iGPU" does that mean safe mode in windows ?
If it does, that doesn't help, maybe you have to disable it in BIOS instead or to set PCIe as default instead of IGPU.

 

[Ivan2836]

I see it now. Does that GPU need an extra power plug ?
You also said: "I already went to safe mode and disabled the iGPU" does that mean safe mode in windows ?
If it does, that doesn't help, maybe you have to disable it in BIOS instead or to set PCIe as default instead of IGPU.

1st Answer: No, it only needs 285 watts of power
2nd: Yes, I have Windows 10.
Also, I tried, I looked at the Integrated Peripherals, and it won't show.

 

[Venom Six Actual]

Hey Ivan,

Please give the Support Staff a call, 1 866 883 5411 M- F, 8AM to 5PM, or send and email to Support@VisionTek.com, and we will assist you. Thanks.