Question Can't mount motherboard with new NVMe SSD - heatsink is too big!

goaskalice00

Distinguished
Dec 11, 2011
137
1
18,695
Hey guys,

I recently purchased a new NVMe PCIe m.2 SSD - specifically, the Viper Patriot VPN100 (1TB) https://www.amazon.com/Patriot-Viper-VPN100-2280-PCIe/dp/B07PB2ZZPL

I have a mini-ITX build in the Dan A4 SFX case. My motherboard is the Gigabyte H270N-WIFI: https://www.gigabyte.com/Motherboard/GA-H270N-WIFI-rev-10#kf

Now, despite my motherboard being compatible with the Viper SSD, its m.2 connector is on the back of the board. Because the Viper SSD has an enormous heatsink, I can't actually mount my motherboard after installing the SSD. The heatsink is simply too high.

Is there anything I can do about this? I'm worried that my only option is to remove the heatsink from the SSD, but considering that they're factory adhered together, I'm concerned that it would ruin the SSD. I've also never installed an NVMe drive before, let alone removed a heatsink from one.

Is there any way for me to make more space behind my motherboard to allow for the SSD w/ heatsink to fit?

Just spent a couple of hours deconstructing and reconstructing my computer, all for nothing :(
 

goaskalice00

Distinguished
Dec 11, 2011
137
1
18,695
rough man. Hopefully Newegg will accept my return. Do you know of any mini-itx motherboards with an NVMe slot on the top of the board? I've been considering a mobo upgrade for a while now, so maybe I should just go that route.
 

goaskalice00

Distinguished
Dec 11, 2011
137
1
18,695
Last edited: