cant see the lights man!!!!!!!!!

[steviemo03]

hi guys
i have recently bulit my own pc and am very proud!!!
but as usual with my projects there is a slight hitch, "this thing is more fragile than a ducati".
there is no Hdrive light nothing nada zilth.
nice indgo glow from lian le case led`s, but no red light when the drive spins up!!!
all the plugs are in the right places, but there is a bit in the manual that says you can have a green led for the drive works same as standard <move a jumper on the board> left it alone at first,,, nothing, moved jumper along one, nothing, there is a green and blue plugs on the board and i dont know if i have to plug the led cable into one of them, when i folled the manul for the standard setting...
any advise, tips would be duly recieved.

chaintech 7njs ultra zenith <Mboard>
amd 2200xp
audigy s.cound
gforce3 Ti200 <510mhz> 128mb
barracuda 7200.7 40gig.

ps its drivivg me mad!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[rffarle]

Not sure about the jumpers or anything, and you probably already tried this, but, the led connectors are (or should be) the only polarity sensitive connectors on the board. Try reversing the plug on the connector. This caused mine not to work for a while till I switched it.

Deja Moo

 

[steviemo03]

crash man said do it all again and he was right <thanks> turn the plug around!!!! no smoke this time thats what it was