Question can't set ram to 3600mhz on strix x470-f gaming

[xBANx]

Hi, i just instaled new ram kingston fury renegade 2x16 gb cl16 3600mt/s and i wont boot up with docp on 3600 cl16 profile 1, profile 2 is 3000cl15 and it works, tryd seting only 3600 oc without docp nothing wont boot, it does boot on 3200. ryzen5800x strix x470-f gaming ,strix 2070super,corsair rm850x 2 nvme-s 1 on pce i card, 2hdd, 1ssd, aio, 6 fans. I updated the bios, reseted cpu and battery, no luck. i runig it now with docp on 3600 but manualy set it on 3200

 

[RealBeast]

I'd contact Kingston to ask them about compatibility as that memory is not listed by either Kingston or ASUS as being compatible, and Kingston doesn't list any above 3200, while ASUS only shows a couple of 3600 sets for that board, none of which are made by Kingston.

 

[xBANx]

Kingston FURY Renegade - DDR4 - kit - 32 GB: 2 x 16 GB - DIMM 288-pin - 3600 MHz / PC4-28800, KF436C16RB1K2/32​

Compatible memory with Asus ROG Strix X470-F Gaming

Don't worry about memory compatibility. With our compatible list for Asus ROG Strix X470-F Gaming you'll always find the perfect supported PC part.

pangoly.com

 

[xBANx]

Hi, i just instaled new ram kingston fury renegade 2x16 gb cl16 3600mt/s and i wont boot up with docp on 3600 cl16 profile 1, profile 2 is 3000cl15 and it works, tryd seting only 3600 oc without docp nothing wont boot, it does boot on 3200. ryzen5800x strix x470-f gaming ,strix 2070super,corsair rm850x 2 nvme-s 1 on pce i card, 2hdd, 1ssd, aio, 6 fans. I updated the bios, reseted cpu and battery, no luck. i runig it now with docp on 3600 but manualy set it on 3200

SOLVED !!! put DDR4-3600 in Dual channel slots (A2-B2 it was in A1-B1) and it was solved instantly.

 

[boju]

SOLVED !!! put DDR4-3600 in Dual channel slots (A2-B2 it was in A1-B1) and it was solved instantly.

This happens a lot. Motherboard manual describes which slots to use. A2/B2 are the primary slots.