Cant start PC after Dust Cleaning

[Prashant_2317]

Cant start Pc After Dust Clean my case

I Removed Heat sink, Hdd, Gpu, Powersupply, And Cleaned

I properly Connect all Connection As i Take a photo of connection

Now when i start my Pc HEATSINK FAN AND fan are running But Theres No HDD LED AND POWERBUTTON led comes no Bips... Blank screen

 

[Baraa Mohammad]

Try reconnecting the hdd power cable and tight it . The try removing cmos battery .

 

[Prashant_2317]

Try reconnecting the hdd power cable and tight it . The try removing cmos battery .

I Read on some article that Cmos Jumper Will reset Bios will This Solve my Problem

 

[Prashant_2317]

Try reconnecting the hdd power cable and tight it . The try removing cmos battery .

Surprisingly Solved... I reopened The Heatsink Beacuse I read some article same as me On Another Article They said that The Processor Pins were bend so It happen and I Know with confidence That i Dont Bend any pin so When i opened the Heat sink i found. A Small Dust Looks like cotton So I Cleaned By Blow and Pc works great..

 

[Baraa Mohammad]

Excellent work

 

[Prashant_2317]

Excellent work

Sata. AND PROBLEM SOLVED... Now i m Successfully running my pC