Can't use the BIOS at all

[gabriel_omido]

Hello, im trying to enter my bios so i can overclock my cpu, but it seems that its not really as it should be...
My motherboard is the MSI Z170 Gaming Pro
I've already tried updating the bios which i wasn't able to do aswell, and i also cant use the keyboard whlie on bios.

 

[cin19]

Then contact MSI to RMA the MB.

 

[gabriel_omido]

Isn't there a better option?
I don't wanna pass through all the trouble, i tried to update it with the driver at msi, but the extension is .190 which i don't know how to use...

 

[cin19]

i tried to update it with the driver at msi, but the extension is .190

What is that? Is it BIOS or something else?

 

[01111111]

Pull the power, then remove the battery for 30 seconds. Some settings may be stopping you from entering BIOS due to "Speed Boot" settings, where USB devices are initialized after post. I also always make sure my keyboard is plugged into a USB 2.0 port for boot reasons but for BIOS that should not matter.

Be aware that you may need to change setting for you system to boot, such as selecting boot device and mode.

In order to flash your bios you will need to make a dos bootable USB stick/CD with the *.190 file on it with the flash utility. MSI's terrible website is making it hard to even find the flash utility.

 

[gabriel_omido]

i tried to update it with the driver at msi, but the extension is .190

What is that? Is it BIOS or something else?

Yes, here's the site from it.
https://msi.com/Motherboard/support/Z170A-GAMING-PRO.html#

 

[gabriel_omido]

In order to flash your bios you will need to make a dos bootable USB stick/CD with the *.190 file on it with the flash utility. MSI's terrible website is making it hard to even find the flash utility.

Ok, I'll try that.

 

[cin19]

Which BIOS version is in your MB ? If the MB had the old version, and you can't update it, then either you don't do it right or the MB has problem. If the MB had the newer version 1.9, then your MB has problem.

 

[gabriel_omido]

Be aware that you may need to change setting for you system to boot, such as selecting boot device and mode.
In order to flash your bios you will need to make a dos bootable USB stick/CD with the *.190 file on it with the flash utility. MSI's terrible website is making it hard to even find the flash utility.

I can't actually boot from the usb, because i can't change anything at the bios
Here's a photo of it

 

[cin19]

How to check the BIOS version. http://www.howtogeek.com/196916/how-to-check-your-bios-version-and-update-it/ Can you post it? because the screenshot is not that good.

 

[gabriel_omido]

How to check the BIOS version. http://www.howtogeek.com/196916/how-to-check-your-bios-version-and-update-it/ Can you post it? because the screenshot is not that good.

My monitor just came here, and it turned up to be the TV's fault, apparently you can't see the BIOS on a TV.
Thanks for your help anyway, really!