Case fan cable broken

[gezorama]

Hi guys,

I bought a rig 2nd hand and have noticed the side case fans connect to a board on the side of the case and the cable that then connects to what I presume is the PSU.

The cable that connects to the PSU is broken and i was wondering if you guys would be able to tell me what it is that I need to do and purchase to fix it. I've attached a picture showing the problem. I also tried to move the white connector from the board but it wouldn't budge. I could have perhaps pulled harder though


http://

https://imgur.com/a/gYQxi


Thanks in advance

Gez

 

[Shektron]

That cable seems to be broken from the fan end of things. If that is true, I don't think there's any replacing it because it'll be directly attached to the fan(in most cases). If it is broken from where I think it is, you'll need new case fans, there ain't no replacing that cable.

 

[nitinvaid20]

what i think is that the wire you are holding in hand should be attached in the board socket via 3 pin fan adapter
but you can use the molex connector too too power the fan as it holds only 2 wires