Just recently built my first PC and my case has a little mini fan controller on the side with three fans connected to it. Each fan is three pin and then a 4 pin molex connector comes out of the side. So I found this cord that came with my PSU that has a 4 pin molex female to a 6 pin SATA to plug into it. After I plugged it in nothing happened.
Also I am running a SSD and HDD, both connected to the board in SATA express, but the HDD isn't working properly.
Any help would be greatly appreciated!!
Also I am running a SSD and HDD, both connected to the board in SATA express, but the HDD isn't working properly.
Any help would be greatly appreciated!!
Facebook
Twitter
Instagram