Case fans upside down ugly!?

[Fincotts1]

Hi, many of you will hate me for this but im really into my builds being aesthetically pleasing, my new case is the enthoo luxe and im going to be putting a custom liquid cooled loop in there.
The enthoo luxe has support for 2x 120mm fans on a radiator at the bottom, i am considering this, but i want the fan to be bringing IN Air not exhausting it but in my opinion fans look awful when the good side is facing the wrong way.

So to sum up, is there anything i can do to make it look nicer, any backwards spinning fans or what?
Thanks Toms HW!

 

[Eximo]

Couple of grill options:

http://www.amazon.com/SilverStone-120mm-Filter-Grill-FF121/dp/B0036WTDHK/ref=sr_1_fkmr2_2?ie=UTF8&qid=1438982524&sr=8-2-fkmr2&keywords=nickel+120mm+fan+grill

http://www.aliexpress.com/item/UN2F-Black-Dustproof-120mm-Mesh-Case-Fan-Dust-Filter-Cover-Grill-for-PC-Computer/1175774005.html

Plenty more out there.

 

[ssddx]

you don't like seeing the wire and sticker which is why you call it ugly?

you could always color sleeve the cable like the rest of your system and put a more interesting sticker over the fan brand logo.

or as ex stated, use a fan filter or grille. that would work too.

another option would be using a push config (fans below radiator) instead of a pull configuration (fans above radiator).

 

[Fincotts1]

you don't like seeing the wire and sticker which is why you call it ugly?

you could always color sleeve the cable like the rest of your system and put a more interesting sticker over the fan brand logo.

or as ex stated, use a fan filter or grille. that would work too.

another option would be using a push config (fans below radiator) instead of a pull configuration (fans above radiator).

Yeh the main problem is the back, like the supports for the actual fan, i mean theres nothing you can do about that really so i will probably grab fan grill