Case for noctua nh-d15?

[Lickedeyes]

Currently I'm using a Nzxt source 530, and at the time I bought it because it was my first build so it was big and cheap. After having it a couple months.. I'd like to look at something prettier.
Any suggestions for a case that could house a noctua d15 cooler, preferably with a lot of glass or visibility?
(Side note that I doubt is possible.. but I have a 200mm front fan that, if I could also find a case I could put that in, would be the perfect case!)

 

[misteriosly]

Well, there are already a few cases with whole side panel as glass.
But most of them exclude 5.25" devices, so do you have one, like CD-ROM or fan controller ?\
You could check out: Phanteks products like: Enthoo Evolv, Enthoo PRO(can have a 200mm top fan, includes the 200mm front one!), Enthoo Pro-M Tempered.
Also Fractal Define R5 Window.
There are also some NZXT limited versions, but since you never mentioned your whole BUILD and budget ill refrain from pointing them, cos they are pricey
All of them are good products, pretty much fully filtered, some of them are big, some include fan controllers.
Whatever suits you!

 

[JackNaylorPE]

Any case from Phanteks should fit the bill... but the Enthoo Evolv Tempered Glass Edition has been describes in reviews as "the best case ever" and also as "being worthy of inclusion in an art gallery. If ya want something a bit bigger, the Enthoo Luxe TGE is also a fine choice. Both the fit the 165mm tall D15

Evolve (no 5.25" drive bays)
https://www.newegg.com/Product/Product.aspx?Item=N82E16811854059

Max GPU Length Allowance = 319 mm
Max CPU Cooler Height Allowance = 192 mm

The Luxe has a 200mm fan mount in front ... but already a fan there and Phanteks case fans are the best on the market. You can also put one on top.

Luxe (Four 5.25" Drive bays)
https://www.newegg.com/Product/Product.aspx?Item=N82E16811854044

Max GPU Length Allowance = 347mm
Max CPU Cooler Height Allowance = 193 mm

 

[rgd1101]

MERGED QUESTION
Question from Lickedeyes : "Case for noctua nh-d15?"

Currently I'm using a Nzxt source 530, and at the time I bought it because it was my first build so it was big and cheap. After having it a couple months.. I'd like to look at something prettier.
Any suggestions for a case that could house a noctua d15 cooler, preferably with a lot of glass or visibility?
(Side note that I doubt is possible.. but I have a 200mm front fan that, if I could also find a case I could put that in, would be the perfect case!)