Case Power Connections

[QOOOOOOOOQ]

Asus Z87 Extreme4, NZXT Phantom(regular version, no numbers), antec hcg-850m, my psu doesnt come with any 4pin molex, only 5, my case needs to plug to those kinda molex to use front external hdd port so how would i work around that? Also, case comes with pled+, pled-, hdd led, power, and reset, all 2pin besides pled are single, spots are at bottom right on mobo, i got them connected but nothing is powered besides the power button and it just blinks when i turn on instead of bein a constant stream of light, manuals dont talk abt where to plug them into...

 

[clutchc]

Your PSU most assuredly comes with 4 pin Molex: http://www.antec.com/connectors.php?ProdID=23893
6 in fact. I don't know what you are referring to when you say your case needs those for the external drive bays.
You can find the MB manual here: http://www.asrock.com/mb/Intel/Z87%20Extreme4/?cat=Manual
Page 25 shows you where each front panel wire goes.

 

[QOOOOOOOOQ]

Your PSU most assuredly comes with 4 pin Molex: http://www.antec.com/connectors.php?ProdID=23893
6 in fact. I don't know what you are referring to when you say your case needs those for the external drive bays.
You can find the MB manual here: http://www.asrock.com/mb/Intel/Z87%20Extreme4/?cat=Manual
Page 25 shows you where each front panel wire goes.

Right, it comes with them, but the interface does not support them. http://www.dvhardware.net/news/2013/antec_high_current_gamer_m_850w.jpg

 

[clutchc]

Interface? What are you talking about? What are you trying to power, a HDD? That uses the SATA power connectors.