Case Upgrade from k280

pasitimusD

Honorable
Feb 12, 2014
90
0
10,630
Hi!! I am enjoying a system on a Cooler Master K280 case with an i5 cpu and 970 Gpu. When gaming, my temps go at 50-60 degs for cpu and 60-70 degs for my GPU with the mobo temp at around 40-45 degs. Recently, i bought a CM Seidon 120v AIO Liquid cooler and placed it in the exhaust mount. Now my Cpu temps wont go past 48-51 degs under load but boy oh boy, my Gpu now goes for 69-75 degs and my mobo up to a HOT 51 degs. I concluded that this is because i dont have a proper exhaust where my hot air goes out since my exhaust is blocked by the radiator (configure in push mount, pushing air into the rad outside of the case). So im looking for a mid tower, mATX case that has a back and an upper exhaust fan mount that has somehow similar price to my K280. And are my temps still ok both before and after I installed the Seidon? Considering its a 970, i think upper 70 is a bad temp. Thanks!!!
 
Solution
D
Check out Fractal Design's Core 1300/1500 cases, they aren't quite as cheap as your current case, but not much else is to be honest.

Your temperatures aren't that bad, if you need more cooling performance get Speedfan and set up some custom fan profiles.
Check out Fractal Design's Core 1300/1500 cases, they aren't quite as cheap as your current case, but not much else is to be honest.

Your temperatures aren't that bad, if you need more cooling performance get Speedfan and set up some custom fan profiles.
 
Solution


Yes, Speedfan runs in the background, you can set it up so it starts on boot.
 
I purchased the Raidmax Cobra Z, since its on sale (still over budget but GF shared some money ^_^). Very Happy, well recommended case. As i thought, the lack of proper exhaust was causing the increased temps. Ran the same games and benchmarks and now my max mobo temp is 41 degs (from 51), max GPU temp is 66 (from 75) and even my Cpu temp improved a bit with max of 43 degs. Installed 2 fans at the top as exhaust and now, my Rig runs cool as it looks!! Thanks for all the help!! Im now closing this thread