Case wire connections Need help quick

[DeumBelli]

I have a few wires left to plug in and im not sure where they go. I have nzxt h440, z97 gaming 5 motherboard, and 750 evga supernova g2. I dont know where to plug in the hd audio cable from the case and how to hook up the 4 case fans. Can someone help me as soon as you can?

 

[DonkeyOatie]

That's the MSI board right? It has five fan headers on it, so you could put one fan on each one. What HD audio are you talking about?

 

[DeumBelli]

That's the MSI board right? It has five fan headers on it, so you could put one fan on each one. What HD audio are you talking about?

I found wht to do with the audio connector but for the fans all i see is a molex plug ( i think thats what its called)

 

[DonkeyOatie]

How many CPU fan connections are you using?

 

[DeumBelli]

i have the cpu fan plugged into the cpu fan on the motherboard but idk what to do with the 4 case fans all i see is a molex plug and one small 3 pin cable. Can i just plug the molex into my psu and the fans would work?

 

[DonkeyOatie]

Can you see the four pin header labelled SYSFAN1 on the CPU side of the first small PCI-e slot?

Look at this link down the page. http://www.pcper.com/reviews/Motherboards/MSI-Z97-Gaming-7-Motherboard-Review/Features-and-Motherboard-Layout

or SYSFAN2 in the corner of the board by the M2 slot, between JFP1 and JFP2

SYSFAN3 is right beside the DIMM behind the 24 pin main power plug.

 

[DeumBelli]

yeah

 

[DonkeyOatie]

Is that OK?

 

[DeumBelli]

I still have the problem of only seeing the molex cable for the fans. Am i supposed to use that since in the case manual it says the molex is connected to the fan hub? Because i dont see anything else to plug in.

 

[DonkeyOatie]

Sorry, I misunderstood your question. You want to know how to plug the in-case fan controller to the motherboard, right?

 

[DeumBelli]

I was wondering if i had to do that for this case. Should i just use the molex to make things easier for me since this is my first time?

 

[DonkeyOatie]

The Molex is intended to be plugged into one of the power supply cables, not the motherboard. This has the fans running full power.

Read this thread http://www.tomshardware.com/answers/id-2058046/nzxt-h440-fans.html

and this case review

http://www.gamersnexus.net/hwreviews/1335-nzxt-h440-specs-review-benchmark

 

[DeumBelli]

So i do have to use the molex?

 

[DonkeyOatie]

If you want to use the on-board fan controller, yes, I think so. You will need to plug the Molex connector from your fan controller into a Molex connector on one of your power supply cables.

you could unplug your fans from the controller and plug each one into the motherboard using one of the fan headers.