Cases that support very long GPU's

[Ghono and Jigy]

I'm looking for cases that support really long gpu's like this GPU http://dynaquestpc.com/product/sapphire-r9-390-nitro-tri-x-oc-8gb-gddr5-512bit/

 

[Roti-Kebab]

I'm looking for cases that support really long gpu's like this GPU http://dynaquestpc.com/product/sapphire-r9-390-nitro-tri-x-oc-8gb-gddr5-512bit/

how much can you spend?

 

[Ghono and Jigy]

I'm looking for cases that support really long gpu's like this GPU http://dynaquestpc.com/product/sapphire-r9-390-nitro-tri-x-oc-8gb-gddr5-512bit/

how much can you spend?

Below $80

 

[Roti-Kebab]

I'm looking for cases that support really long gpu's like this GPU http://dynaquestpc.com/product/sapphire-r9-390-nitro-tri-x-oc-8gb-gddr5-512bit/

how much can you spend?

Below $80

https://pcpartpicker.com/part/nzxt-case-cas340wb1

 

[Ghono and Jigy]

That is the only case?

 

[Alexis92]

oh Hey a Fellow Filipino, i also buy from this shop here's what you can get.

http://dynaquestpc.com/product/nzxt-source-340-s340-mid-tower/
this or
http://dynaquestpc.com/product/nzxt-tempest-410-mid-tower-chassis-airflow-case/

 

[Roti-Kebab]

That is the only case?

The reason i only recommend that case is because it is far far superior, higher quality and far better looking than others. This is the best bang for your buck.

 

[Ghono and Jigy]

What about cases like the Corsair Carbide 100R and 200R?

 

[Alexis92]

What about cases like the Corsair Carbide 100R and 200R?

yeah those are great too, you can try and get the 300 R but it goes over your budget by 75 Pesos tho.

EDIT : if you want the 100r, you need to put the gpu in the top pci slots, if the bottom it wont fit.

 

[lowc]

Hey there!
For such a powerful graphic card and quite expensive also I would strongly recommend you a little more expensive case (with great airflow and cooling) to keep all your components including this graphic card cool.
For example Cooler Master 690 III (you have few editions/models - black/green with/without side window etc.).
I bought the above mentioned case 1 week ago for myself - Green Edition (with window side panel) http://www.ebay.com/itm/COOLER-MASTER-CM-690-III-GREEN-WITH-SIDE-WINDOW-PANEL-USB-3-0-SSD-SUPPORT-/272003936323?hash=item3f54b2b043:g:ybwAAOSw3ydVth72

VGA card length:
423 mm / 16.6 inch (without cage)
312mm / 12.3 inch (with SSD cage)
280mm / 11.0 inch (with HDD cage)
CPU cooler height: 171mm / 6.7 inch

Your card has dimensions 308 X 127 X 42.3 mm so it could fit in the case with SSD cage on which is still great.
I myself have completely removed the upper cage because I have only 1 SSD (which I have mounted behind the motherboard with included mounts) and I used bottom HDD cage for my 3 HDD's.

And I must say I'm very very satisfied with it. A lot of space for great cable managing and excellent airflow with very decent build materials.
I've bought 2 more additional fans (2 were already included in the case (front 200mm and rear 120mm). I've decided for NZXT fans (1x 200mm for top out-take and 1x120mm bottom in-take).
Previously I had budget gigabyte case for 40-50€ and now with this one my temperatures dropped significantly!
Graphic card (Gigabyte R9 280x 3GB GDDR5) temperatures dropped from 82-85°C to 72°C (maximum), CPU (i7 4771) dropped also for about 10°C just with replacing the case and optimizing airflow.

It's your decision but I think that case matters quite a bit. I would recommend this one.

Best regards.

 

[Alexis92]

Hey there!
For such a powerful graphic card and quite expensive also I would strongly recommend you a little more expensive case (with great airflow and cooling) to keep all your components including this graphic card cool.
For example Cooler Master 690 III (you have few editions/models - black/green with/without side window etc.).
I bought the above mentioned case 1 week ago for myself - Green Edition (with window side panel) http://www.ebay.com/itm/COOLER-MASTER-CM-690-III-GREEN-WITH-SIDE-WINDOW-PANEL-USB-3-0-SSD-SUPPORT-/272003936323?hash=item3f54b2b043:g:ybwAAOSw3ydVth72

VGA card length:
423 mm / 16.6 inch (without cage)
312mm / 12.3 inch (with SSD cage)
280mm / 11.0 inch (with HDD cage)
CPU cooler height: 171mm / 6.7 inch

Your card has dimensions 308 X 127 X 42.3 mm so it could fit in the case with SSD cage on which is still great.
I myself have completely removed the upper cage because I have only 1 SSD (which I have mounted behind the motherboard with included mounts) and I used bottom HDD cage for my 3 HDD's.

And I must say I'm very very satisfied with it. A lot of space for great cable managing and excellent airflow with very decent build materials.
I've bought 2 more additional fans (2 were already included in the case (front 200mm and rear 120mm). I've decided for NZXT fans (1x 200mm for top out-take and 1x120mm bottom in-take).
Previously I had budget gigabyte case for 40-50€ and now with this one my temperatures dropped significantly!
Graphic card (Gigabyte R9 280x 3GB GDDR5) temperatures dropped from 82-85°C to 72°C (maximum), CPU (i7 4771) dropped also for about 10°C just with replacing the case and optimizing airflow.

It's your decision but I think that case matters quite a bit. I would recommend this one.

Best regards.

well in his country he can't jsut go to ebay, hes not in america i can tell because im pretty sure me and him have the same country because that website that came with the answer is from PH

 

[lowc]

I just posted the link for him to see which case is it (and the price).
Where he will get it is his concern

I bought it personally drove 5km with car to our distribution in Slovenia got it same day I ordered online.
http://www.pcplus.si/cooler-master-690-iii-midi-atx-cms-693-gwn1-crno-zeleno-ohisje.html

 

[Alexis92]

I just posted the link for him to see which case is it (and the price).
Where he will get it is his concern

I bought it personally drove 5km with car to our distribution in Slovenia got it same day I ordered online.
http://www.pcplus.si/cooler-master-690-iii-midi-atx-cms-693-gwn1-crno-zeleno-ohisje.html

oh alright, its a sexy case tho might get one for myself 😉