Celeron 800 / PIII 800

[jclw]

If you have a P2B rev 1.02 or greater:
- you can use an FC-PGA 100FSB Coppermine @ 1.80V
- you can use an FC-PGA 133FSB Coppermine @ 1.80V
- To use a Coppermine you need BIOS rev 1012 or later.
--------

If you have a P2B-B rev 1.02 or greater:
- you can use a SECC2 100 FSB Coppermine
- you can use an FC-PGA 100FSB Coppermine @ 1.60V~1.65V
- To use a Coppermine you need BIOS rev 1011 or later.
--------

If you have a P2B-D rev 1.02 or greater:
- you can use a SECC2 100 FSB Coppermine
- you can use a SECC2 133 FSB Coppermine
- you can use an FC-PGA Coppermine 100FSB @ 1.60V~1.65V
- you can use an FC-PGA Coppermine 133FSB @ 1.60V~1.65V
- ***YOU MUST HAVE A REV 1.06 D03 OR LATER TO RUN DUAL 133FSB AND/OR FC-PGA COPPERMINES***
- To use a Coppermine you need BIOS rev 1012B or later.
--------

If you have a P2B-D2 rev 1.02 or greater:
- you can use a SECC2 100 FSB Coppermine
- you can use a SECC2 133 FSB Coppermine
- To use a Coppermine you need BIOS rev 1011A or later.
--------

If you have a P2B-DS rev 1.02 or greater:
- you can use a SECC2 100 FSB Coppermine
- you can use a SECC2 133 FSB Coppermine
- you can use an FC-PGA Coppermine 100FSB @ 1.60V~1.65V
- you can use an FC-PGA Coppermine 133FSB @ 1.60V~1.65V
- ***YOU MUST HAVE A REV 1.06 D03 OR LATER TO RUN DUAL 133FSB AND/OR FC-PGA COPPERMINES***
- To use a Coppermine you need BIOS rev 1012B or later.
--------

If you have a P2B-F rev 1.00 or greater:
- you can use a SECC2 100 FSB Coppermine
- you can use an FC-PGA 100FSB Coppermine @ 1.60V~1.65V
- you can use an FC-PGA 133FSB Coppermine @ 1.60V~1.65V
- To use a Coppermine you need BIOS rev 1012 or later.
--------

If you have a P2B-LS rev 1.02 or greater:
- you can use an FC-PGA 100FSB Coppermine @ 1.80V
- To use a Coppermine you need BIOS rev 1011 or later.
--------

If you have a P2B-N rev 1.02 or greater:
- you can use a SECC2 100 FSB Coppermine
- To use a Coppermine you need BIOS rev 1011 or later.
--------

If you have a P2B-S rev 1.02 or greater:
- you can use an FC-PGA 100FSB Coppermine @ 1.80V
- To use a Coppermine you need BIOS rev 1011 or later.
--------

If you have a P3B-F rev 1.03 or greater:
- you can use a SECC2 100 FSB Coppermine
- you can use a SECC2 133 FSB Coppermine
- you can use an FC-PGA 100FSB Coppermine @ 1.60V~1.65V
- you can use an FC-PGA 133FSB Coppermine @ 1.60V~1.65V
- To use a Coppermine you need BIOS rev 1005 or later.

- JW

 

[jclw]

taikin: but running a PIII slot 1 should be possible with REV 1012 right?

No. You need an FC-PGA chip in a slocket because the onboard voltage regulator does not support coppermine voltages.

-JW

 

[Guest]

i use a coppermine Celeron 1000 but it is not recognized.

 

[ronco05]

Ibuyer.net is selling the Iwill Slocket 2 for 20 bucks.by the way will the iwill slocket recognize the new celeron 1.2ghz on a 440bx board?

 

[Guest]

it depends on your mobo