Change FSB1 jumper on Asrock G41C-GS.?

[stargate14]

Hello,
I 've got an Asrock G41C-GS motherboard with Cpu intel 1333mhz & Ram memory ddr2 800mhz! Do I need to change the FSB1 jumper to pin 2-3 as it says in the manual. I'm comfused because in the manual it says "If you adopt FSB1333-CPU and DDR3 1333 memory module on this motherboard, you need to adjust the jumper. Please short pin2, pin3 for FSB1 jumper. Otherwise, the CPU and memory module may not work properly on this motherboard." but if you adopt a FSB1333-CPU and you have DDR2 Ram installed? Do you really need to change it? I want to know because my computer freezes for some seconds only one time usually after the first boot when I run league of legends and then it works great. I've checked the memory with memtest and also I installed windows 7 from the beggining and updated all drivers to the latest version. Any help!? Thank you much.

 

[C12Friedman]

You should not need to change the jumper from it's current location. I suspect the lag/freezing phenomena is from drivers and/or backgrounds loading for the game.

 

[stargate14]

You should not need to change the jumper from it's current location. I suspect the lag/freezing phenomena is from drivers and/or backgrounds loading for the game.

Hello.
Thanks for your reply,
I've done fresh install of W7 recently and installed all motherboard drivers , chipset etc. and windows updates.
I didn't installed any other program after windows 7 installation and also checked the startup services and apps and didn't found nothing suspicious. I have the latest drivers installed for my GForce 9600 GT and also tried an older driver version. That didn't worked too! This freeze is happening only once a day, usualy after the first boot and when I launch League of Legends client. It freezes for 10-20 seconds and then its ok all.

 

[stargate14]

Any help please? What can cause this freeze ?