Change TP-LINK TL-WR740N name and password

[motherhaveapples]

Hello.

I have DSL Router (TP-LINK TL-R860) where network cable is connected. I can change settings for this at http://192.168.1.1/.

Now my problem. From TL-R860 I get a LAN cable, connected to TP-LINK TL-WR740N who create wireless with default name and without password - how I can change that? If I try to access http://192.168.1.1/ still TL-R860 appears there.

Sorry for bad english.

 

[christinebcw]

Your DSL Router uses IP address "192.168.1.1".

To access a different piece of equipment, you must type in its unique IP Address.

So your WR740N will have a different address - perhaps 192.168.0.1.

(On Page 15, Section 3.1, this manual uses that ".0.1" address. )

Your router (R860) may assign it a different value, however.

 

[motherhaveapples]

Isn't 0.1. How I can descover wireless router IP address?

 

[christinebcw]

From a DOS box, type

IPCONFIG

and see what "Default Gateway" IP Address is. It should be some "192.168.1.__" value.

NOTE:
DOS box... from the RUN line, type "CMD" and press ENTER...

This presents an old-style "DOS box" with a C: prompt.

Then, type "IPCONFIG" and press ENTER.

 

[motherhaveapples]

Founded in DCHP Clients List (192.168.1.101) but isn't working. What should I do? Tried with port 80 and 8080, same thing.

 

[motherhaveapples]

Nobody?

 

[christinebcw]

If I powered-down that WR740N and disconnected it from the router, then powered-down my PC and hooked it directly into the WR740N, and powered up the device then the PC, maybe it's standard IP address would be functional and you could alter its UserID and Password. Then, shut everything down and re-connect all the pieces in proper order.

 

[sparko21]

Go to address 192.168.0.1

username : admin
password : admin

left side click the "wireless" the go to "wireless security"

you can see under the WPA/WPA2 - Personal(Recommended)
Version:
Encryption:
Password: <--- go here and type your recommended password

then SAVE.
It will ask you to reboot the computer.
then done.

I hope this works for you guys.

 

[afaq mehar]

Iam Chang tplink password