Changing RAM speeds in bios.. help!

[petersona95]

Hi, I just purchased 2x4gb 1600MHz DDR3 ram. However, they only seem to be running at 1333MHz. I am trying to adjust this in the BIOS but I'm not sure how to do that.

My motherboard is a GA-P55-UD3L. Here is a picture of what I can change.

http://i.imgur.com/FDhaiWp.jpg

Thanks in advance.

 

[HST_James6666]

what make is your RAM exact product code then we can give you the exact numbers to enter.
It might have a XMP setup you can use.
Otherwise if you still have the packaging the clockspeed, latencies and voltage you need to input

 

[petersona95]

what make is your RAM exact product code then we can give you the exact numbers to enter.
It might have a XMP setup you can use.
Otherwise if you still have the packaging the clockspeed, latencies and voltage you need to input

Hi, I do have the packaging still, but it does not give me any information other than a warranty.

Here is my exact RAM

http://www.amazon.com/Kingston-HyperX-FURY-2x4GB-1600MHz/dp/B00J8E93G6/ref=sr_1_1?ie=UTF8&qid=1417469773&sr=8-1&keywords=hyperx+2x4gb

Thank you in advance for the help.

EDIT: Here's a picture of the back of the ram:

http://i.imgur.com/yRiR8vI.jpg

 

[HST_James6666]

Right here are the things you want to change in BIOS:
Memory Speed: 1600Mhz
Timings 10-10-10-28 2N
Voltage: 1.5

They are the settings you want to change in the BIOS with the number to change them to next to it.
I assume you can do this by changing the top one from auto and entering your own speeds, after Go to "channel A timing settings" and input the Timings there repeat this for the other channel. Any problems with the timings show me a picture of the "channel A timing settings" screen so I can tell you what to type where. Make sure the voltage is 1.5 and boot.
Check the RAM speeds in Cpu-z (download here: http://www.cpuid.com/softwares/cpu-z.html ), if you are unsure screenshot Memory and SPD tabs in CPU-z and post the pictures here so I can see them.

 

[HST_James6666]

Did it work?

 

[petersona95]

Right here are the things you want to change in BIOS:
Memory Speed: 1600Mhz
Timings 10-10-10-28 2N
Voltage: 1.5

They are the settings you want to change in the BIOS with the number to change them to next to it.
I assume you can do this by changing the top one from auto and entering your own speeds, after Go to "channel A timing settings" and input the Timings there repeat this for the other channel. Any problems with the timings show me a picture of the "channel A timing settings" screen so I can tell you what to type where. Make sure the voltage is 1.5 and boot.
Check the RAM speeds in Cpu-z (download here: http://www.cpuid.com/softwares/cpu-z.html ), if you are unsure screenshot Memory and SPD tabs in CPU-z and post the pictures here so I can see them.

Here are pictures of the system memory multiplier screen, and the channel A timings screen.

Channel A timings: http://imgur.com/Yoo0rNX
System memory multiplier: http://imgur.com/cUQJWdW

If I change the values of the system memory multiplier, the highest value, 10, gives me a speed of 1333MHz. However after googling I'm pretty sure I can get higher speeds than that with this board.

As for the channel timings, I'm assuming the 4 numbers you gave me should be entered as those first 4 values?

Thank you for your help by the way.

 

[HST_James6666]

Yeah that is how you set the timings, was not sure how it would be displayed. Change the command rate at the bottom to 2 (that is what the 2N meant). As for the speed I said the wrong thing leave that on auto. Goto Frequency/voltage control>Memory configure>DRAM frequency (second down) and change that to 1600Mhz.

 

[HST_James6666]

Check it works in CPU-Z

 

[petersona95]

Yeah that is how you set the timings, was not sure how it would be displayed. Change the command rate at the bottom to 2 (that is what the 2N meant). As for the speed I said the wrong thing leave that on auto. Goto Frequency/voltage control>Memory configure>DRAM frequency (second down) and change that to 1600Mhz.

Hi, unfortunately I could not find this setting anywhere in the bios. The only place I saw you could change frequency was the system memory multiplier option. However I was able to change all the other settings. Thanks again for your help. Once again my mobo is GA-55--UD3L.