Chassis intrude, Please check your system. Fatal Error. -Help!!

[OpticFever]

Hey everyone, I just built a $1000 gaming computer. This is my first build, so I might have messed up. But everything seemed fine, until I turned it on. It posted correctly, and then I powered it on, entered the bios, at the same time put the windows 8 disc (100% legit) and when i clicked "save and reset" it showed me that error message. I've tried different boot orders, you name it. I dont know what to do, please help. The motherboard is a M5A97 Le R2.0 from Asus... Any ideas? I've called Asus, but I was on hold for 30mins so I hung up...
Help!!

 

[scout_03]

check in your motherboard user manual you could have move something on the board that active chassis intrude advice .

 

[Calvin7]

If you don't intend to use the chassis intrusion feature then a jumper block is attached to the chassis signal and ground pins. Sometimes the jumper block is not making good contact between the two pins.

 

[OpticFever]

If you don't intend to use the chassis intrusion feature then a jumper block is attached to the chassis signal and ground pins. Sometimes the jumper block is not making good contact between the two pins.

Thank You so much!!!