Question Cisco ASA anyconnect vpn access between 3 subnets

[elciosso]

Hi!

I have a problem getting vpn access to work between subnets (separate vlans) using Cisco ASA 5505.

I have 3 buildings with layer 3 switching between:

Building1 - 192.168.24.0 (vlan10)
Building2 - 192.168.15.0 (vlan20)
Building3 - 192.168.16.0 (vlan30)

When I connect through anyconnect vpn clients I can only access the network on Building1

What I want is to have access to all 3 subnets from within the vpn connection.

Everthing is nated and accesslists created with network objectc for all subnets. The vpn accesslist is allowing all 3 subnets as well.
Internal routes are also set where needed.

Am I missing something ? Is this maybe not a firewall issue but the vlans and switching ?


Cheers.

 

[failboat]

cisco has monitoring similar to iftop I believe. You can see where packets are moving and if any are coming back.

 

[elciosso]

The packets arrive when source is Building 2 or 3 to destination Building 1.

But not when source is Building 1 trying to reach Building 2 and 3.