Ok so I just had probably one of the biggest mistakes I've made. I was playing with some thermal grizzly conductonaught cause I wanted to try out maximizing my laptops cooling. I didn't realize that it was going to super easy to pop out so like I put a little pressure on the back of the tube to squeeze out a little bubble and boom just shot a load all over my monitors.
Aside from the obvious lack of preperation and care taken in this situation I need to try and salvage my screens. I got most of it off with a combination of isopropyl alcohol and paper towels. Right after I cleaned it I googled it and found out I was totally not meant to use alcohol on a display. Anyways there's still 1 mark on one of my screens I've been rubbing with cotton tips and I can't get it off. Any Ideas on what I could do?
Aside from the obvious lack of preperation and care taken in this situation I need to try and salvage my screens. I got most of it off with a combination of isopropyl alcohol and paper towels. Right after I cleaned it I googled it and found out I was totally not meant to use alcohol on a display. Anyways there's still 1 mark on one of my screens I've been rubbing with cotton tips and I can't get it off. Any Ideas on what I could do?