[SOLVED] Cloned SSD Not seen in BIOS -- won't boot

[Sylvilagus]

Greetings all - Pretty much a newbie here.
I am trying to make a new SSD my main boot drive. I can boot off the old HDD and read/write to the New SSD, but cannot boot from the SSD. I’ve tried to read through other similar threads but none seem exactly like my situation.
Any help would be greatly appreciated.


I am running Windows 10 on an HP 700-215xt, Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
BIOS Version/Date AMI 80.19, 7/18/2014
BIOS Mode UEFI

I installed a Samsung SSD 970 EVO Plus 1TB in my PCI Express x16 (Gen 3.0)
Updated driver from samsung
Cloned my HDD using Samsung Data Migration
Windows Disk Manager recognizes it. Screen shot below. Disk 0 is HDD, Disk 1 SSD
But BIOS doesn’t see it therefore I can’t select it in Boot Order.
I have tried:

• Turning off Legacy in Secure Boot
• Disconnecting the HDD and trying to reboot on SSD alone.

The screen says something like Media Found, then “Start PXE Over Ipv4”
Screen Shot of Disk Manager

 

[rgd1101]

old chipset don't support booting from nvme ssd. get a 2.5" sata type ssd

 

[Sylvilagus]

old chipset don't support booting from nvme ssd. get a 2.5" sata type ssd

Do you know this for a fact or is it speculation? I've had others suggest to me that the BIOS doesn't support NVME boot but the board would with a mod to the BIOS.

 

[rgd1101]

then you should go to the others to get the mod bios