Club3D JokerCard chip locations

[speedy-MACHO]

Hi, I am trying to install the Gelid Icy Vison-A on my club3d jokercard. Step 3.2 says to stick the thermal pads on the "surface of the RAM chips" and "VRM heatsink". I can't find them and the problem is that the jokercard is a 7870 but a 7950 at the same time? It looks kind of like the 7870 but there are quite some differences. Can anyone help me with either telling me how to locate the RAM chips and VRM heatsink or giving me a picture with big, red arrows (blue is ok to) pointing to the RAM and the VRM?

 

[speedy-MACHO]

Ok I'll just help myself:
dear speedy-MACHO, in the center of your card you should see a 45 degrees angled square. This actually is the gpu. In your case, there are 8 black rectangles around it: 4 above it, 4 next to it. These are the ram chips, on every ram chip you should stick a thermal pad.
As for the VRM - uh that's where i got stuck. On the right there are 2 big black boxes with the print "R47", according to some very scarce, indirect sources those are the VRM's. Or at least two of em, because normally there are more. What are the VRMs?! I cant find them! helphelphelp!

 

[speedy-MACHO]

Ok I solved it my self, for the ones with the same problem, check the tutorial I made: http://www.tomshardware.co.uk/faq/id-2178069/installing-gelid-icy-vision-club3d-jokercard-tips-finding-vrm.html