coin door wiring

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

A question for robotron. I have two wires(red + black) from the coin
door mechanism that lead nowhere. They are just hanging. I have to
go into adjustments and select free play. Can someone help me to wire
them to accept credits? Also thanks to Steve Muccione, K.S. and VaxX
for my last post.

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

Do they come from the coin door? or from the harness? I'm just re-wiring
one (needed a break) I'll go out and have a look. Do you have a picture
you could e-mail me?

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

I had a look, if thier hanging inside the coin door, they could be for
the lockout coils.

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

Ahh...

I'm leaving right now for the airport... If you can't figure out out before
I get back I'll check on mine.

Alternatly, check out Clay's site (www.multigame.com). Look in the
instruction manual that comes with his board. If I remember correctly he
has wriing instructions for his board, but they should also help you figure
out where the wire should go (I believe he has origional pinouts in the
manual).

best,

steve

<tonyd2084@hotmail.com> wrote in message
news:s0g051tora1vln89ncd4fd0k4iuiheu3nv@4ax.com...
>A question for robotron. I have two wires(red + black) from the coin
> door mechanism that lead nowhere. They are just hanging. I have to
> go into adjustments and select free play. Can someone help me to wire
> them to accept credits? Also thanks to Steve Muccione, K.S. and VaxX
> for my last post.

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

On Sun, 03 Apr 2005 15:19:39 -0400, tonyd2084@hotmail.com wrote:

>A question for robotron. I have two wires(red + black) from the coin
>door mechanism that lead nowhere. They are just hanging. I have to
>go into adjustments and select free play. Can someone help me to wire
>them to accept credits? Also thanks to Steve Muccione, K.S. and VaxX
>for my last post.


Thanks to all for the help. As it turns out the red + black wires were
added at a later date from someone else. I used my defender coin door
wiring and was able to figure it out. They taped the original wires
and zip tied them. Not sure why they did this.