The following link will provide you with information on what my build looks like (https://pcpartpicker.com/list/ZYVn6R). I am trying to figure out what I need to do to get the ram to run up to spec. I read someplace on the internet that it should automatically perform as intended and then I read somewhere else that I may need to O.C.
The partpicker website tells me " The Patriot Viper Steel 16 GB (2 x 8 GB) DDR4-4400 Memory operating voltage of 1.45 V exceeds the Intel Coffee Lake Refresh CPU recommended maximum of 1.35 V+5% (1.417 V). This memory module may run at a reduced clock rate to meet the 1.35 V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum."
Does that mean the RAM is not compatible or do I need to do something in the bios?
The partpicker website tells me " The Patriot Viper Steel 16 GB (2 x 8 GB) DDR4-4400 Memory operating voltage of 1.45 V exceeds the Intel Coffee Lake Refresh CPU recommended maximum of 1.35 V+5% (1.417 V). This memory module may run at a reduced clock rate to meet the 1.35 V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum."
Does that mean the RAM is not compatible or do I need to do something in the bios?