So after failing to install my Corsair RGB 70 firmware, I decided to restart my computer to see if that fixed it. I was greeted with a "failure to boot" screen in my bios. I clicked on proceed to boot, and thus it did... and will indefinitely.
Now if I turn my computer on, it just boots to my motherboard screen (not even my BIOS .I cannot access them,) and then turns off and back on. It keeps repeating this until I cutoff my power.
16 GB DDR4 RAM
Gigabyte z170x Gaming-5
Corsair 750W PSU
i7-6700k OC at 4.5GHZ
GTX 1080
OH, and on the first time this happened, I was granted with the error message on this motherboard screen that read:
"BlInitializeLibrary failed 0xc0000009a"
Any help would be highly appreciated.
Now if I turn my computer on, it just boots to my motherboard screen (not even my BIOS .I cannot access them,) and then turns off and back on. It keeps repeating this until I cutoff my power.
16 GB DDR4 RAM
Gigabyte z170x Gaming-5
Corsair 750W PSU
i7-6700k OC at 4.5GHZ
GTX 1080
OH, and on the first time this happened, I was granted with the error message on this motherboard screen that read:
"BlInitializeLibrary failed 0xc0000009a"
Any help would be highly appreciated.