Computer boots, display shows "no signal"

[mattguida22]

Recently bought a computer from cyberpower, computer boots but monitor says "no display". Monitor and HDMI/DVI cords work because I tried it on my other build. Also tried plugging into the GPU and motherboard. Still no display. Can anyone please help?

CASE: CyberPowerPC AZZA Taurus 5000 Full-Tower Gaming Case w/ USB 3.0 & 7 color RGB LED Side-Panel Window

GPU: GeForce® GTX 1050 2GB GDDR5 (Pascal) (Single Card)

CPU: AMD Ryzen 5 1600 3.2GHz [3.6GHz Turbo] Six-Core 16MB L3 Cache 95W Processor

FAN: ENERMAX ETS-T40F-BK CPU Cooler w/ Black ENERMAX Twister PWM fans

HDD: 1TB SATA-III 6.0Gb/s 32MB Cache 7200RPM HDD

MEMORY: 16GB (8GBx2) DDR4/3000MHz Dual Channel Memory (GEIL Super Luce RGB)

MOTHERBOARD: MSI X470 GAMING PLUS AM4 ATX w/ RGB, USB 3.1, Gbt LAN, 3 PCIe x16, 3 PCIe x1, 6 SATA3, 2 M.2 SATA/PCIe

PSU: 850 Watts - EVGA 850W GQ 80 Plus Gold Power Supply

 

[Barty1884]

Is the GPU fully seated? Are there any debug LEDs on the motherboard?

How are you connected to the monitor? Are you using adapters?

 

[mattguida22]

Is the GPU fully seated? Are there any debug LEDs on the motherboard?

How are you connected to the monitor? Are you using adapters?

GPU is fully seated, I've removed it and re-seated it into the motherboard. As for debug LED's I am not too sure if the motherboard has one. I have been connected HDMI straight to the HDMI port, DVI to the DVI port, and a displayport adapter to HDMI from the GPU and have tried connecting the DVI and HDMI from the motherboard ports.