Computer doesn't display or make beeps. Possible solutions.

[QuantumXRhinocerus]

I have an HP Envy 700-230. Have changed stock power supply to a Corsair cx750m to power my gpu. This computer doesn't display anything or make beeps. I've tried different monitors, dvi cables(using integrated graphics for troubleshooting), as well as disconnect everything including fans to the point it was the CPU, psu, and ram. What's weird is when I turn off the computer through the case power button it doesn't turn off but instead increase the fan speed and the case lights turn off. Monitor doesn't scan when the computer is on and connected but instead falls asleep. Reconnecting the dvi cable makes the monitor display sleeping message again. Would definitely like some help on this. Have tried clearing cmos as well. I am slumped.

 

[jatin3489]

I have an HP Envy 700-230. Have changed stock power supply to a Corsair cx750m to power my gpu. This computer doesn't display anything or make beeps. I've tried different monitors, dvi cables(using integrated graphics for troubleshooting), as well as disconnect everything including fans to the point it was the CPU, psu, and ram. What's weird is when I turn off the computer through the case power button it doesn't turn off but instead increase the fan speed and the case lights turn off. Monitor doesn't scan when the computer is on and connected but instead falls asleep. Reconnecting the dvi cable makes the monitor display sleeping message again. Would definitely like some help on this. Have tried clearing cmos as well. I am slumped.

What is source of your beep . is it coming out of your hard disk , gpu , powersuppy , or motherboard ?

 

[smorizio]

make sure the small 4 pin eps plug on the mb is filled. if your trying to use a new gpu make sure the mb has the newest bios it may be a bios issue.

 

[QuantumXRhinocerus]

I have an HP Envy 700-230. Have changed stock power supply to a Corsair cx750m to power my gpu. This computer doesn't display anything or make beeps. I've tried different monitors, dvi cables(using integrated graphics for troubleshooting), as well as disconnect everything including fans to the point it was the CPU, psu, and ram. What's weird is when I turn off the computer through the case power button it doesn't turn off but instead increase the fan speed and the case lights turn off. Monitor doesn't scan when the computer is on and connected but instead falls asleep. Reconnecting the dvi cable makes the monitor display sleeping message again. Would definitely like some help on this. Have tried clearing cmos as well. I am slumped.

What is source of your beep . is it coming out of your hard disk , gpu , powersuppy , or motherboard ?

There is no beep and no display. The speaker is soldered to the motherboard. I think its just a dead motherboard.

 

[jatin3489]

I have an HP Envy 700-230. Have changed stock power supply to a Corsair cx750m to power my gpu. This computer doesn't display anything or make beeps. I've tried different monitors, dvi cables(using integrated graphics for troubleshooting), as well as disconnect everything including fans to the point it was the CPU, psu, and ram. What's weird is when I turn off the computer through the case power button it doesn't turn off but instead increase the fan speed and the case lights turn off. Monitor doesn't scan when the computer is on and connected but instead falls asleep. Reconnecting the dvi cable makes the monitor display sleeping message again. Would definitely like some help on this. Have tried clearing cmos as well. I am slumped.

What is source of your beep . is it coming out of your hard disk , gpu , powersuppy , or motherboard ?

There is no beep and no display. The speaker is soldered to the motherboard. I think its just a dead motherboard.

the beep sound usually comes when the mother board boots up so we cant really say its dead !
Is anything that is connected to your motherboard working is working i don't care even if its the power button in the front panel then it means there is power in your motherboard and its not dead yet 1

 

[QuantumXRhinocerus]

I have an HP Envy 700-230. Have changed stock power supply to a Corsair cx750m to power my gpu. This computer doesn't display anything or make beeps. I've tried different monitors, dvi cables(using integrated graphics for troubleshooting), as well as disconnect everything including fans to the point it was the CPU, psu, and ram. What's weird is when I turn off the computer through the case power button it doesn't turn off but instead increase the fan speed and the case lights turn off. Monitor doesn't scan when the computer is on and connected but instead falls asleep. Reconnecting the dvi cable makes the monitor display sleeping message again. Would definitely like some help on this. Have tried clearing cmos as well. I am slumped.

What is source of your beep . is it coming out of your hard disk , gpu , powersuppy , or motherboard ?

There is no beep and no display. The speaker is soldered to the motherboard. I think its just a dead motherboard.

the beep sound usually comes when the mother board boots up so we cant really say its dead !
Is anything that is connected to your motherboard working is working i don't care even if its the power button in the front panel then it means there is power in your motherboard and its not dead yet 1

The cpu fan works, so does the case leds. But once you turn it on, turning it off through the case turns off the case leds but the cpu fan still stays on but sometimes with more or less power, it never completely turns off until manual switch from PSU. I have tried a different PSU as well and same problem. I reseated CPU, cleaned it everything in case there was a short circuit due to dust but nothing. It just tells my monitor to go to sleep.