Hi guys! Just want to check if someone could give me the answer as to why this is happening. It was fine just a week ago and i didnt change any hardware at the start. but it suddenly takes forever to start up and to shut down/restart.
What i notice is when i boot up my PC, once the Gigabyte booting logo comes on screen it loads and the RGB from my mouse turns off. but whenever i click on it, it will flash the rgb and turns off immediately after.
my build is
MoBo: B450m Ds3h
Ram: Vengeance LPX 3600mhz (changed to 3200mhz as that is what my mobo can handle) <-- New Ram. Previously was a 2666mhz kingston ram. but still same issues.
Processor: AMD Ryzen 5 2600
PSU: 530W
GPU: Palit 1060 3gb
1 Hdd to storage, 1 ssd for windows. 1ssd for games i play alot.
Things i did:
AHCI instead of RAID
Load optimize defaults for BIOS
Change new RAM
Take out HDD to test if its faulty
Take out SSD(for games) to test if its faulty
Clearing all startup programs when windows is turned on
Unplug all peripherals
Resetting my CMOS by taking the battery out.
Enable fast boot
Doing windows memory diagnostics (No Error).
Cant do start up repair as it seems it always runs into an error or some sort. please help!
What i notice is when i boot up my PC, once the Gigabyte booting logo comes on screen it loads and the RGB from my mouse turns off. but whenever i click on it, it will flash the rgb and turns off immediately after.
my build is
MoBo: B450m Ds3h
Ram: Vengeance LPX 3600mhz (changed to 3200mhz as that is what my mobo can handle) <-- New Ram. Previously was a 2666mhz kingston ram. but still same issues.
Processor: AMD Ryzen 5 2600
PSU: 530W
GPU: Palit 1060 3gb
1 Hdd to storage, 1 ssd for windows. 1ssd for games i play alot.
Things i did:
AHCI instead of RAID
Load optimize defaults for BIOS
Change new RAM
Take out HDD to test if its faulty
Take out SSD(for games) to test if its faulty
Clearing all startup programs when windows is turned on
Unplug all peripherals
Resetting my CMOS by taking the battery out.
Enable fast boot
Doing windows memory diagnostics (No Error).
Cant do start up repair as it seems it always runs into an error or some sort. please help!