Question Computer launching with no display

Mar 7, 2020
3
0
10
0
So a build I made today will start with no beeps but I'm getting no display on the monitor. I've tried a different monitor and different VGA cable but same problem. I have checked and unplugged all cables, Taken out the CMOS battery, tested the PSU, reseated components including CPU and put one stick of RAM in each slot, but it's the same problem.

specs are -
ASUS Prime 450M-A
AMD Ryzen 5 2600X Gen2 AM4
Corsair Vengeance DDR4 2x4GB
750W Corsair RM750x Fully Modular
250GB WD Blue 3D NAND M.2 SATA
Be Quiet! Pure Rock Slim CPU Air Cooler

The only thing I've noticed a flashing orange strip of light on the side of the mobo but I've been told that's aesthetic.

Any help would be appreciated.
 
Mar 7, 2020
3
0
10
0
Your current system has no graphics solution. If you intend to use motherboard graphics ports then you'll need a different processor.
Sorry, why would that be? I was just intending to use onboard graphics so would the CPU need dedicated graphics cores for that to work?
 
Mar 7, 2020
3
0
10
0
Motherboard supports Integrated Graphics in the 3rd, 2nd and 1st Gen AMD Ryzen with Radeon Vega Graphics/ Athlon with Radeon™ Vega Graphics Processors .

Your CPU is a 2nd Gen Ryzen WITHOUT Radeon Vega Graphics.
Grand, that's an easy fix. Thanks so much. Feel a bit stupid for missing that. I've made 4 builds in 3 years and never even thought about that as a problem
 

ASK THE COMMUNITY

TRENDING THREADS