[SOLVED] Computer not starting

Nov 27, 2018
1
0
10
I recently built a pc and it worked fine. But one day I turned it on to play some rust and I was getting no signal on my monitor, so I checked my motherboard and saw it giving me a 00 code. what should I do?
My parts:
ASUS MAXIMUS X HERO ROG
CORSAIR VENGEANCE 1x16 ram
GIGABYTE 1050ti
700 watt psu (can’t remember name)
Intel core i5 8400
 
Solution
According to the Q-code table from manual page A-1, 00=Not used.

So
1) Check your PSU by the paper clip method, http://forum.corsair.com/v3/showthread.php?t=63991 After that go to step 2.
2) Remove the gtx 1050ti, use onboard iGPU to boot the PC.
3) If you get the same, remove the RAM too, if you can boot, but you get no RAM error, and the RAM may have problem.
4) If you can't boot the PC without the RAM, remove the cpu to check the cpu socket to see any bent pin(s) or not.
According to the Q-code table from manual page A-1, 00=Not used.

So
1) Check your PSU by the paper clip method, http://forum.corsair.com/v3/showthread.php?t=63991 After that go to step 2.
2) Remove the gtx 1050ti, use onboard iGPU to boot the PC.
3) If you get the same, remove the RAM too, if you can boot, but you get no RAM error, and the RAM may have problem.
4) If you can't boot the PC without the RAM, remove the cpu to check the cpu socket to see any bent pin(s) or not.
 
Solution