Computer on but no visual?

[BrandonTheGPU]

Hello, So I took my heatsink fan out to clean and put it back in, computer wasn't starting so reinstalled it facing another way, worked like a dream. Only problem is that the monitor isn't saying there is any connection to it, I have plugged in and out the cables but to no avail. The motherboard I have is a LGA 1150 Socket (idk if it matters) and I have had no previous display problems.
(computer is hooked up to monitor via VGA)
Can anyone help me?

Thanks - Brandon

 

[Ironsounds]

Hello... MB VGA connector?
1) press your monitor setup button and verify the VGA input.

 

[BrandonTheGPU]

Hello... MB VGA connector?
1) press your monitor setup button and verify the VGA input.

It is hooked up to the VGA connector at the back of the PC and made sure it was set to vga but no avail

 

[Ironsounds]

Hello... 2) un-plug your Power supply from the wall... and Take a closer look at your fan/cooler re-install... see if it's touching/pressing a Part on your MB ?
3) make sure all the MB power connectors are in place
4) Try re-seating your Ram sticks.

 

[BrandonTheGPU]

Hello... 2) un-plug your Power supply from the wall... and Take a closer look at your fan/cooler re-install... see if it's touching/pressing a Part on your MB ?
3) make sure all the MB power connectors are in place
4) Try re-seating your Ram sticks.

Thanks a lot mate!, although I didn't necessarily use this method I actually fixed it by plugging the vga straight into my graphics card rather then through the mother board. Is this ok? I am not sure but it is fixed now If you could let me know if I can keep it this way without any problems that would be good . Thanks for your time!

 

[Ironsounds]

Hello... Yes you can. GJ B )

 

[BrandonTheGPU]

Hello... Yes you can. GJ B )

Thanks for the help